Compare commits

..

111 Commits

Author SHA1 Message Date
Peter Hutterer
76b1d58a97 evdev 2.7.0
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2012-03-07 20:39:09 +10:00
Peter Hutterer
224a28de25 Only force REL_X/Y if no ABS_X/Y exists
5c5b2c8db8 added forced x/y axes if a device
has any axes of the same mode. This was too broad a brush, some devices have
a relative wheel but absolute x/y axes and would now get misdetected as
purely relative device.

Only force relative axes if a device no rel x/y _and_ no abs x/y.

Reproducible: virtual machine with QEMU USB Tablet will stop working

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
2012-01-26 16:07:10 +10:00
Chase Douglas
bc2f01ab83 Copy last valuator values into new touch valuator masks
Evdev is a 100% stateful protocol. The following represents three
touches. Two touches begin and end at the same time at (500, 500) and
(1000, 1000). The third touch begins after the first two end, and is at
(500, 500).

ABS_MT_SLOT		0	/* Set touch slot */
ABS_MT_TRACKING_ID	0	/* New touch with ID 0 in slot 0 */
ABS_MT_POSITION_X	500	/* Initial X position */
ABS_MT_POSITION_Y	500	/* Initial Y position */
ABS_MT_SLOT		1	/* Set touch slot */
ABS_MT_TRACKING_ID	1	/* New touch with ID 1 in slot 1 */
ABS_MT_POSITION_X	1000	/* Initial X position */
ABS_MT_POSITION_Y	1000	/* Initial Y position */
SYNC				/* End of frame */
ABS_MT_SLOT		0	/* Go back to slot 0 */
ABS_MT_TRACKING_ID	-1	/* Touch in slot 0 ended */
ABS_MT_SLOT		1	/* Go to slot 1 */
ABS_MT_TRACKING_ID	-1	/* Touch in slot 1 ended */
SYNC				/* End of frame */
ABS_MT_SLOT		0	/* Go back to slot 0 */
ABS_MT_TRACKING_ID	2	/* New touch in slot 0 with ID 2 */
SYNC				/* End of frame */
ABS_MT_TRACKING_ID	-1	/* Touch in last slot (0) ended */
SYNC				/* End of frame */

Note that touch 2 has the same X and Y position as touch 0. This is
implied because no new value was emitted for slot 0. In fact, Linux will
not emit an event in the same slot with the same event type and code
unless the value has changed. Thus, we can only assume that all the MT
valuators have the same values as they were when they were last sent for
the given slot.

This change adds an array of valuator mask to hold all the last valuator
values that came from evdev for each slot. When a new touch begins, all
the last values are copied into it.

This patch assumes initial axis values of 0 in each slot. Linux and
mtdev do not provide a facility to query the current values of axes in
each slot yet. This may cause spurious incorrect touch valuator values
at the beginning of an X session, but there's nothing we can do about it
right now.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2012-01-24 12:12:47 +10:00
Peter Hutterer
9d9c9870c8 Prefere relative axis labelling over absolute axis labelling
If a device has both relative and absolute axes, we'd initialise the
relative axes but label them with the absolute labels.

The current code is broken for mixed mode devices. Most of these devices
operate primarily in relative mode, but have some absolute axes available
for secondary functionality. For now, label the relative axes properly. We
can fix the absolute axes later.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
2012-01-18 16:47:16 +10:00
Peter Hutterer
5c5b2c8db8 Force x/y axes to exist on devices with any other axes (#44655)
Too much in the server relies on x/y to exist and to be axes 0 and 1. So if
any relative axes exist, initialize REL_X/Y or ABS_X/Y as well.

For servers up to 1.11: a scrollwheel-only device now has relative axes
where it only had buttons before.

For servers 1.12 or later: the device now has x/y in addition to the scroll
axes.

X.Org Bug 44655 <http://bugs.freedesktop.org/show_bug.cgi?id=44655>

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2012-01-17 14:33:54 +10:00
Pete Beardmore
854df75f49 missing multitouch related define tests
addition of two missing define tests required when no multitouch related
symbols are available in user-space

Fixes X.Org Bug 44578 <https://bugs.freedesktop.org/show_bug.cgi?id=44578>

Signed-off-by: Pete Beardmore <pete.beardmore@msn.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2012-01-10 10:56:45 +10:00
Chase Douglas
8c55e94a6a Set the default resolution to 0
If we don't know the resolution, set it to 0. This is invalid, and tells
the X client that we don't know the resolution, rather than reporting an
incorrect value.

This value was originally from commit
6271494faa, which is the initial commit
from Adam Jackson adding absolute axis support.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2012-01-06 12:17:00 +10:00
Peter Hutterer
965338e9d0 Remove unused udev.c
Added in 683a55e504 due to a botched up
rebase -i. The contents of udev.c and EvdevIsVirtual are identical, there is
no need for an extra file for this one function.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2012-01-03 08:44:27 +10:00
Cyril Brulebois
0075da20d6 configure.ac: Fix udev/libudev dependency.
In 683a55e504, a dependency on libudev was
added, but documented in configure.ac as a dependency on udev (which
also happens to ship a pkg-config file).

Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2012-01-03 08:40:02 +10:00
Jeremy Huddleston
009ac94a8e Remove redundant redeclaration of Evdev3BEmuPreInit
Found-by: Tinderbox
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
2011-12-31 21:28:53 -05:00
Cyril Brulebois
4b76d80e93 evdev 2.6.99.901
Signed-off-by: Cyril Brulebois <kibi@debian.org>
2011-12-31 18:38:30 +01:00
Peter Hutterer
6dd6f2d3c6 Require xserver 1.12 RC1
Remove the ABI check hack, just check for the server version directly now
that we have one that definitely has the multitouch APIs.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-29 10:37:38 +10:00
Peter Hutterer
0c7c087f77 Test for mtdev before assuming multitouch
If the XI2.2 headers are present but mtdev isn't, build without MULTITOUCH
defined.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-29 10:19:48 +10:00
Peter Hutterer
ba9377c6d9 Remove need for --enable-multitouch
If we spot inputproto 2.1.99.3, we assume we have a capable X server. This
should really be a server version check, but the server version hasn't been
bumped yet.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-24 12:49:18 +10:00
Peter Hutterer
7f7606fc46 Include config.h from evdev.h
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-24 12:49:18 +10:00
Peter Hutterer
0ba58f483e Always include mt_mask in the evdev struct
Even if MT support isn't available, include it in the build. The checks in
the code check whether mt_mask is non-NULL but they would all need ifdef
escaping otherwise.

Leave the mtdev part inside the ifdef however, so that we don't need the
mtdev header if we don't build with multitouch.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-24 12:18:16 +10:00
Peter Hutterer
5fb4875747 Merge branch 'multitouch' 2011-12-23 08:16:54 +10:00
Peter Hutterer
e99ab2314f Don't count legacy and MT axes twice
The kernel exports both ABS_X and ABS_MT_POSITION_X (and a couple others)
for a multi-touch capable device. For such devices, only count the axis once
since we submit ABS_MT_POSITION_X through ABS_X.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-20 15:11:56 +10:00
Peter Hutterer
191660189a Add is_blacklisted_axis() helper
The kernel exports a bunch of information as axis that shouldn't be an axis
and we don't treat it as axis in the server. Add this helper instead of
checking for the axis codes manually.

No function change.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-20 14:18:30 +10:00
Peter Hutterer
a1c3f8efbb Drop now-unnecessary XI 2.1 and XI 2.2 error suppression defines
Gone since inputproto 2.1.99.3

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-20 13:32:06 +10:00
Peter Hutterer
f3c628acc4 Map ABS_MT_POSITION_X/Y into ABS_X/Y
MT axes are the same as traditional axes, so one into the other so we get
x/y coordinates regardless wich axes it comes from.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-20 11:09:37 +10:00
Paulo Zanoni
7909975b0b Fix relative events with swapped axes
After we swap the axes, we only call valuator_mask_set for axes that are
not zero, so we need to unset the axes that became zero when swapped.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-16 16:09:16 +10:00
Paulo Zanoni
8d6dfd13b0 Fix absolute events with swapped axes
We were correctly swapping the valuator values, but we were not
calling valuator_mask_unset() when needed, so the cursor kept jumping
to the edges.

This patch does the swapping before the main "for", so we don't need to
store unswapped_{x,y} and unswapped_isset_{x,y} even when we don't need
to swap.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-15 14:58:59 +10:00
Peter Hutterer
fed454192d Use xf86InitValuatorAxisStruct, the touch-specific version was dropped
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-12-15 08:55:32 +10:00
Chase Douglas
cf93a21df1 Don't send pointer events for multitouch touchscreen devices
Pointer events will be emulated by the server.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
2011-11-29 18:02:58 -08:00
Peter Hutterer
fac1a41c75 Add the required defines to compile against the inputproto
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:57:26 +10:00
Peter Hutterer
3175a2a96d Print to the log if we find multitouch axes.
No real effect on the code, but it helps to have that line in the log when
searching for driver issues.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
5e9b027807 Replace 0/1 button values with enums
BUTTON_PRESS is much harder to confuse with a button number than a simple 1.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
2ce305129c Skip event posting for empty slots.
ABS_MT_SLOT comes before any other events. The following order of events
is common for protocol B devices (and mtdev):

...
EV_SYN
ABS_MT_SLOT        → posting here means we miss on the position information
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
ABS_MT_SLOT
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
EV_SYN

Store the stot state as SLOT_EMPTY after posting an event (i.e. EV_SYN and
ABS_MT_SLOT) and then don't post until the next slot/syn event.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
9411749f76 Replace open_slot/close_slot with a SlotState enum
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
239e972be1 Simplify a condition, only the event type differs here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
6127923fe0 When resetting the queue, don't reset the touchMask
Otherwise we segfault after the first SYN event

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
fc4f98153c MT axes are counted separately, make sure they're initialized too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
fabee66bcc 0 is the value for "unknown/unlimited" number of touches
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
91d90a7959 Use mtdev API to allocate/free mtdev structs
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Peter Hutterer
c1b89bda12 Remove duplicate line
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:36 +10:00
Chase Douglas
907b7cad3f Ensure touchpad events are always processed with MT
Without this change, an MT touchpad in relative mode could end a touch
while not resetting the oldMask used to calculate relative values. This
fix allows a Magic Trackpad to behave as a relative mode device again.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
2011-11-11 15:50:36 +10:00
Chase Douglas
c9a2b4e9ce Use MTDev for multitouch devices
MTDev translates all multitouch devices to the slotted evdev protocol.
This provides a clean and uniform interface and reduces message handling
inside the input module and X.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
2011-11-11 15:50:36 +10:00
Chase Douglas
e18abd0049 Add experimental XI 2.1 multitouch support
This multitouch addition only supports slotted MT evdev protocol
devices. Support must be enabled at configure time using
--enable-multitouch.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>

Amendments: XI_TouchMotion -> XI_TouchUpdate, rename mtMask to mt_mask

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:50:06 +10:00
Peter Hutterer
683a55e504 Use a new "Virtual Device" boolean property to mark virtual devices
Use udev to check for the device's sysfs path, if it contains LNXSYSTM it's
a kernel-emulated device. This property can then be used to determine if
there are any real devices connected, allowing the desktop environment to
e.g. turn off the touchpad whenever there's a mouse attached.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 15:42:31 +10:00
Peter Hutterer
a9cdb6590c Move misplaced #endif caused by smooth-scrolling merge
Bad conflict resolution in xf86-input-evdev-2.6.0-30-g745fca0

Reported-by: Sebastian Glita <glseba@yahoo.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-11 07:31:40 +10:00
Peter Hutterer
dd000dd4fa Bump to 2.6.99
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-09 16:04:06 +10:00
Peter Hutterer
745fca03a2 Merge branch 'smooth-scrolling'
Conflicts:
	src/evdev.c

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-11-09 16:01:48 +10:00
Peter Hutterer
b450efdf95 Support smooth scrolling on REL_WHEEL, REL_HWHEEL and REL_DIAL
Automatic smooth scrolling setup for these axes, with REL_WHEEL and REL_DIAL
both mapping into vscrolling. REL_WHEEL is the preferred axis.

Mouse wheel emulation is not yet updated for smooth scrolling.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2011-11-09 15:56:55 +10:00
Peter Hutterer
eede8ccffc Don't crop long value from EvdevBitIsSet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
2011-11-04 07:47:47 +10:00
Jools Wills
2aba790ed3 emuThird: Use xf86SetIntOption, not xf86SetBoolOption for integer values
Signed-off-by: Jools Wills <jools@oxfordinspire.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-10-31 09:58:49 +10:00
Max Schwarz
49693892ce type-safe inline functions for bitmask manipulation
We can't use BitIsSet/SetBit from the server (inputstr.h) since they
operate on byte arrays. EvdevSetBit is added in preparation for the
"smooth-scrolling on wheel emulation" patch.

Signed-off-by: Max Schwarz <Max@x-quadraht.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-10-24 16:24:35 +10:00
Peter Hutterer
070f30e089 Exit axis labelling if axes are neither rel nor abs
No actual effect since labels_len is always 0 anyway but let's make the
return more explicit.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-08-15 11:34:12 +10:00
Terry Lambert
ffe35b6c25 xf86-input-evdev: Return proper default for unknown values in pInfo->device_control.
Signed-off-by: Terry Lambert <tlambert@chromium.org>
Reviewed-by: Stephane Marchesin <marcheu@chromium.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-07-18 11:44:24 +10:00
Peter Hutterer
5069e05335 Remove unused misc_label and val
evdev.c: In function 'EvdevInitAxesLabels':
evdev.c:2192:11: warning: variable 'misc_label' set but not used
[-Wunused-but-set-variable]
obsolete with 880ad1e19a

emuWheel.c: In function 'EvdevWheelEmuPreInit':
emuWheel.c:252:10: warning: variable 'val' set but not used
[-Wunused-but-set-variable]
obsolete with b0737bdbd1

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2011-06-15 10:36:36 +10:00
Peter Hutterer
0b9fad23a3 Print abs axes ranges on verbosity 6.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2011-06-15 10:36:36 +10:00
Peter Hutterer
b79776cf8c Require server 1.10
We require ABI 12.2 in the driver, enforce it through pkg-config.
Technically ABI 12.2 is first available in 1.9.99.902 but 1.10 looks so much
nicer.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2011-06-15 10:36:36 +10:00
Daniel Kurtz
a52cd1cab2 Set prop_product_id undeletable
prop_invert was accidentally being set undeletable twice.

Signed-off-by: Daniel Kurtz <djkurtz@google.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-06-15 10:36:13 +10:00
Peter Hutterer
eaf202531f Export device node as property.
There is currently no mapping between XI devices and physical devices other
than what can be extracted by parsing the Xorg logfile. Add new property
"Device Node" to the driver to export the open device file.

Server 1.11 and later standardises on this property name.

The client is responsible for detecting if the device is on the same host
and converting the data into a more useful format (e.g. sysfs path).

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-05-27 15:32:23 +10:00
Peter Korsgaard
74151b3c52 Handle touchscreens without BTN_TOUCH
Some touchscreens (like the Lumio crystaltouch in single touch mode) send
BTN_LEFT rather than BTN_TOUCH:

Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x202e product 0x5 version 0x111
Input device name: "LUMIO Inc LUMIO CrystalTouch ver 1.1C"
Supported events:
  Event type 0 (Sync)
  Event type 1 (Key)
    Event code 272 (LeftBtn)
    Event code 273 (RightBtn)
    Event code 274 (MiddleBtn)
  Event type 2 (Relative)
    Event code 9 (Misc)
  Event type 3 (Absolute)
    Event code 0 (X)
      Value    650
      Min        0
      Max     4095
    Event code 1 (Y)
      Value   3221
      Min        0
      Max     4095
  Event type 4 (Misc)
    Event code 4 (ScanCode)
Testing ... (interrupt to exit)
Event: time 1305882024.934011, type 4 (Misc), code 4 (ScanCode), value 90001
Event: time 1305882024.934017, type 1 (Key), code 272 (LeftBtn), value 1
Event: time 1305882024.934029, type 3 (Absolute), code 0 (X), value 270
Event: time 1305882024.934034, type 3 (Absolute), code 1 (Y), value 1513
Event: time 1305882024.934039, type 2 (Relative), code 9 (Misc), value 1

This causes evdev to handle these device as a mouse rather than a
touchscreen, which naturally doesn't work very well. We already internally
translate BTN_TOUCH as BTN_LEFT, so accept this kind of devices as
touchscreens by checking for devices with BTN_LEFT, absolute X/Y and NO
relative X/Y axes.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-05-27 15:26:57 +10:00
Peter Hutterer
e9d96e87ac Add a property to toggle function key mode
On some keyboards, the multimedia function keys are overlaid with the F
keys. This property enables clients to switch the primary mode of these F
keys between function keys and multimedia keys.
Some keyboards provide an Fn key to toggle between the modes. This is
hardware-specific and may or may not work on any given keyboard device.

The current imlementation is only hooked up to apple keyboards.
The kernel provides a tweak to enable/disable.

/sys/module/hid_apple/parameters/fnmode
    0 .. keyboard sends Fx keys, Fn disabled
    1 .. keyboard sends multimedia keys, Fn toggles to function keys
    2 .. keyboard sends function keys, Fn toggles to multimedia keys

If fnmode is on 0, we force it to 2.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
2011-05-27 15:26:57 +10:00
Peter Hutterer
bb15bac149 Export product/vendor ID through a property.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2011-05-27 15:26:53 +10:00
Peter Hutterer
7611d2fc73 Move invert variable to the block it is used in.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2011-05-20 13:38:26 +10:00
Chase Douglas
ebe41bfba7 Copy out of proximity values into current values selectively
Otherwise, an event that causes us to go into proximity with some new
valuator values will retain some old valuator values from when last in
proximity. This change ensures that all values posted while out of
proximity are accounted for.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-04-18 13:56:32 +10:00
Chase Douglas
68a6a18fc2 Ensure all known valuator values are stored when out of proximity
The current code overwrites *all* the stored axis values with whatever
came in from evdev. Evdev is a stateful protocol, so it only sends us
updates to the axis values that have changed. We need to only update
the values that have changed.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-04-05 13:49:28 +10:00
Chase Douglas
eeacd3e5a8 Ensure events are posted when entering into proximity
Fixes LP: #736829 (https://bugs.launchpad.net/bugs/573006)

Re-fixes old X.Org Bug 29645
<http://bugs.freedesktop.org/show_bug.cgi?id=29645>

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-04-05 13:48:58 +10:00
Simon Thum
5708e38494 rename valuator init functions
Since the mode of valuators (no longer?) bears a relation to the device class
actually initialized, this naming was quite misleading.

Signed-off-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-03-23 13:11:09 +10:00
Rami Ylimäki
41111ce1ef Remove constness of device filename to avoid warning when freed.
A warning from free() can be avoided by casting the constness away
from its argument pointer or by not declaring the pointer as const in
the first place.

Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-03-09 15:28:10 +10:00
Rami Ylimäki
b4c47d5f94 Release leaked device identifier on input device disconnect.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-03-09 15:23:50 +10:00
Rami Ylimäki
50193a0dd3 Release leaked XKB options on input device disconnect.
Currently the XKB options duplicated in EvdevAddKeyClass are never
released. For example, connecting and disconnecting a bluetooth
keyboard repeatedly causes a steadily growing memory leak.

Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-03-09 15:23:39 +10:00
Peter Hutterer
0049cce4d0 Use Absolute/Relative as argument to xf86Post*
xf86Post* takes an int for the is_absolute parameter. Since the XI protocol
spec requires Relative to be 0 and Absolute to be 1, use those instead to
make the code easier to read.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-02-11 13:31:52 +10:00
Peter Hutterer
d9001a6be9 Add third button emulation.
New properties:
"Evdev Third Button Emulation" → switch on/off
"Evdev Third Button Emulation Timeout" → timeout until event is delivered
"Evdev Third Button Emulation Button" → phys button to be emulated
"Evdev Third Button Emulation Threshold" → move threshold before emulation
is cancelled

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <tissoire@cena.fr>
2011-02-08 11:34:51 +10:00
Peter Hutterer
22db196815 Static atoms don't need to be initialized to 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-31 13:39:46 +10:00
Peter Hutterer
54ac2306b8 Replace xf86Msg() with xf86IDrvMsg().
The latter provides a standardised message format in the form of
    driver name: device name: message

making it easier to grep for driver messages in the log.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-31 12:07:48 +10:00
Chase Douglas
768c25a99b Add support for masked valuators
With the X server now supporting masked valuators for XI2, enable
support in X evdev.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-25 11:34:24 +10:00
Chase Douglas
b5c9f41b2b Switch to "goto" logic for error handling when adding classes
This will be necessary for the addition of multitouch functionality.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-24 14:12:46 +10:00
Chase Douglas
8bc4be3048 Remove support for X input ABI < 12.2
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-24 14:12:39 +10:00
Peter Hutterer
30c3645e20 evdev 2.6.0
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-11 12:46:40 +10:00
Chase Douglas
3b52fe2ea4 Print out error messages when failing to init devices
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-06 08:35:27 +10:00
Peter Hutterer
540a4cce90 evdev 2.5.99.903
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2011-01-05 09:04:56 +10:00
Peter Hutterer
bed25600f6 Don't update first_val and num_val if we don't have data (#32480)
For touchpads, rel_queued may be on (due to abs to rel conversion) but the
delta for x/y is 0/0 on the first touch. Hence, we don't have any valuators
to post. The current results in a num_vals of -15 and a subsequent segfault
when the data is posted to the server.

Start with a last valuator of -1, so that we know if we have at least one to
post.

X.Org Bug 32480 <http://bugs.freedesktop.org/show_bug.cgi?id=32480>

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
2011-01-04 08:12:21 +10:00
Peter Hutterer
9aea1c5fa0 Add use_proximity bit for BTN_TOOL handling.
Touchpads send garbage data between BTN_TOOL_FINGER and BTN_TOUCH. This
leads to cursor movement towards invalid positions (bottom left corner,
usually).

Add a new flag "use_proximity" as a delimiter for BTN_TOUCH handling. If
unset, the actual proximity bits are ignored, no proximity events are sent
and BTN_TOUCH is used for the tool handling.

Example event stream for synaptics:

Event: time 1292893041.002731, -------------- Report Sync ------------
Event: time 1292893041.015807, type 1 (Key), code 330 (Touch), value 0
Event: time 1292893041.015812, type 3 (Absolute), code 0 (X), value 4283
Event: time 1292893041.015813, type 3 (Absolute), code 1 (Y), value 4860
Event: time 1292893041.015815, type 3 (Absolute), code 24 (Pressure), value 23
Event: time 1292893041.015817, type 3 (Absolute), code 28 (Tool Width), value 5
Event: time 1292893041.027537, -------------- Report Sync ------------
Event: time 1292893041.038854, type 3 (Absolute), code 0 (X), value 1
Event: time 1292893041.038857, type 3 (Absolute), code 1 (Y), value 5855
Event: time 1292893041.038859, type 3 (Absolute), code 24 (Pressure), value 1
Event: time 1292893041.038861, type 3 (Absolute), code 28 (Tool Width), value 5
Event: time 1292893041.038864, -------------- Report Sync ------------
Event: time 1292893041.062432, type 3 (Absolute), code 24 (Pressure), value 0
Event: time 1292893041.062435, type 3 (Absolute), code 28 (Tool Width), value 0
Event: time 1292893041.062437, type 1 (Key), code 325 (ToolFinger), value 0
Event: time 1292893041.062438, -------------- Report Sync ------------

Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
2010-12-22 09:18:52 +10:00
Peter Hutterer
0c987a929d Revert "Don't count BTN_TOUCH as tool. (#29428)"
Synaptics devices send garbage between BTN_TOUCH and BTN_TOOL_FINGER. By
switching to use this as proximity data now, the pointer is reset to the
garbage data position (usually around 1/5855).

This reverts commit 899218e181.

Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
2010-12-22 09:18:52 +10:00
Peter Hutterer
242a01eb0f Rename proximity to in_proximity.
No functional change, just making it a bit more obvious to read.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
2010-12-22 09:07:28 +10:00
Peter Hutterer
7415953b9a Fix grammar typo in comment.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-12-21 11:13:15 +10:00
Peter Korsgaard
1ced7ec7e2 evdev: rename EvdevCacheCompare() to EvdevCache()
Since 59056e656c (Remove the reopen timer logic) from last year,
EvdevCacheCompare() is only used for caching ioctl values and not for
comparing, so remove the unused compare logic and rename the function
to EvdevCache().

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-12-13 10:46:43 +10:00
Peter Hutterer
1c5ad6f8a0 evdev 2.5.99.902
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-12-08 12:40:49 +10:00
Peter Hutterer
6fd1d0860e Return error codes from EvdevOpenDevice()
The server's behaviour is to stop adding new devices when a BadAlloc occurs
on any device (on the assumption that new devices won't magically have more
memory). Change EvdevOpenDevice() to return an error code of BadValue when
it fails (and thus to the server) to prevent other devices being ignored
because of one misconfigured one.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2010-12-07 08:05:42 +10:00
Peter Hutterer
31ba99e9ed evdev 2.5.99.901
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-11-19 15:03:33 +10:00
Peter Hutterer
a4aefca2ed Reshuffle to avoid the need for XI86_CONFIGURED.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
2010-10-28 13:11:56 +10:00
Peter Hutterer
20d7a0a4aa Input API 12 requires a valuator mode for each axis.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
2010-10-27 08:32:21 +10:00
Nikolai Kondrashov
5e26ba8641 Extend button mapping to full ranges
Extend button code to number mapping to cover full BTN_MOUSE and BTN_MISC
ranges, including undefined codes.

This extends mapping introduced with 0367e387 to the following:

        1       BTN_LEFT        BTN_0       BTN_TOUCH
        2       BTN_MIDDLE      BTN_1       BTN_STYLUS
        3       BTN_RIGHT       BTN_2       BTN_STYLUS2

        8       BTN_SIDE        BTN_3
        9       BTN_EXTRA       BTN_4
        10      BTN_FORWARD     BTN_5
        11      BTN_BACK        BTN_6
        12      BTN_TASK        BTN_7
        13      0x118           BTN_8
        14      0x119           BTN_9
        15      0x11A           0x10A
        16      0x11B           0x10B
        17      0x11C           0x10C
        18      0x11D           0x10D
        19      0x11E           0x10E
        20      0x11F           0x10F

This should fix https://bugs.freedesktop.org/show_bug.cgi?id=30336

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-10-22 07:52:48 +10:00
Peter Hutterer
71dd18f728 Rename CountBits to EvdevCountBits.
Avoid name collision with the server.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
2010-10-21 08:13:25 +10:00
Peter Hutterer
c3e49f2b95 Use an array for the proximity bits.
Instead of two lists that need to be kept in sync, just store the bits in an
array and run through them.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2010-10-21 08:12:44 +10:00
Peter Hutterer
b06d3ffdcd Rename abs/rel/prox to abs_queued/rel_queued/prox_queued.
Mainly to avoid confusing between pEvdev->prox and pEvdev->proximity and to
better express what these fields are actually holding.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2010-10-21 08:12:38 +10:00
Benjamin Tissoires
3646371eef Add the names of the valuators for the multitouch properties
Thoses definitions have been included in the kernel and in the X server.
However, the evdev driver has not been updated accordingly.

Without these definitions, the multitouch axes are not correctly labelled.

Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-10-18 10:00:54 +10:00
Peter Hutterer
b48f4c41c0 Add proximity support.
When one of the tools comes into proximity, queue up a proximity event and
send it accordingly.

Includes special handling for tablets that do not send axes with tools
(#29645)

Some tablets send axis values, then EV_SYN, and in the next event the
BTN_TOOL_PEN/BTN_TOUCH, etc. For these tablets, the cursor doesn't move as
coordinates while not in proximity are ignored.

Buffer coordinates received while out-of-proximity and if we get a proximity
event without other coordinates, re-use the last ones received.

X.Org Bug 29645 <http://bugs.freedesktop.org/show_bug.cgi?id=29645>

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
2010-10-18 09:54:42 +10:00
Peter Hutterer
185ad42078 Rename evdev->tool to evdev->proximity.
evdev doesn't care about the actual tool used, only that it is used as an
indicator for proximity. Rename the field accordingly to make the code more
obvious to read.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
2010-10-13 11:01:12 +10:00
Peter Hutterer
7282e3ac6c When posting buttons, post absolute valuators if we have them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
2010-10-11 08:47:47 +10:00
Peter Hutterer
c504852aa2 Fix valuator offset when posting absolute motion events.
If first_v was not zero, the values passed to xf86PostMotionEventP were
wrong.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
2010-10-11 08:46:51 +10:00
Peter Hutterer
4bbf9c9125 Don't pass pointers around to first_v and num_v.
We only use them as values, no need for the addresses.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
2010-10-11 08:46:09 +10:00
Peter Hutterer
684426a9d2 De-duplicate event queue access.
Factor out access to the next queue element in a static function to be
reused for button and key presses.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
2010-10-11 08:44:26 +10:00
Peter Hutterer
9664e5a487 Remove refcnt initialization from InputDriverRec.
Removed from the server with
commit 6130170e7e9b64c611ee942ec3455dd1a185193d
Author: Adam Jackson <ajax@redhat.com>
Date:   Sat Sep 18 06:41:35 2010 -0400

    xfree86: Remove unused refcounting from input drivers

And given that it was unused, we don't need to ifdef it.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-10-11 07:52:14 +10:00
Nikolai Kondrashov
0367e3871f Clean up button code to number mapping
Now BTN_MOUSE, BTN_MISC and BTN_DIGI button ranges are all mapped to the
same lower numbers including first three, corresponding to the LMR mouse
buttons. Like this:

    1       BTN_LEFT        BTN_0       BTN_TOUCH
    2       BTN_MIDDLE      BTN_1       BTN_STYLUS
    3       BTN_RIGHT       BTN_2       BTN_STYLUS2

    8       BTN_SIDE        BTN_3
    9       BTN_EXTRA       BTN_4
    10      BTN_FORWARD     BTN_5
    11      BTN_BACK        BTN_6
    12      BTN_TASK        BTN_7
    13                      BTN_8
    14                      BTN_9

This streamlines the button mapping under the assumption that these ranges
don't generally appear in a single device simultaneously. If they do appear,
they will simply report overlapping button numbers.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-09-07 10:40:36 +10:00
Nikolai Kondrashov
617a09e298 Add BTN_TOUCH/STYLUS/STYLUS2 support.
These three buttons are mapped into buttons 1/2/3, respectively.
Overlapping range with BTN_LEFT/MIDDLE/RIGHT, assuming that these
ranges don't generally appear in a single device simultaneously.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-09-07 10:38:20 +10:00
Tim Yamin
b83515485b SwapAxes should rescale raw values when enabled
Current implementation assumes that X & Y axes have the same min and max
values. If they don't, you'll end up with funny behaviour if SwapAxes is
turned on.

Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-09-07 10:31:02 +10:00
Peter Hutterer
009d442aa3 Merge branch 'input-api' of git://people.freedesktop.org/~whot/xf86-input-evdev 2010-09-01 13:04:29 +10:00
Nikolai Kondrashov
10493de96e Improve dumb tablet detection
Improve dumb tablet detection by checking if BTN_STYLUS or BTN_STYLUS2
(first or second pen barrel button) is present when BTN_TOOL_PEN is not
found.

This enables detection of tablets without explicit tool proximity reporting.
These include at least four UC-Logic tablet models: WP4030U, WP5540U,
WP8060U and PF1209, on which many Genius and Trust models are based.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-09-01 12:48:04 +10:00
Peter Hutterer
829facd516 Bump to 2.5.99.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-08-31 14:21:53 +10:00
Nikolai Kondrashov
fbafe59420 Fix comments about BTN_TOOL_PEN.
Fix incorrect usage of BTN_DIGI instead of BTN_TOOL_PEN in comments.
Fix forgotten pEvdev->digi reference.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-08-31 14:21:39 +10:00
Peter Hutterer
4964c61f4b Return BadMatch for already configured devices.
PreInit can now return different error codes. Return BadAlloc for alloc
failures and BadMatch if the device was already configured or the cache
comparison/probe failed.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-07-22 13:26:40 +10:00
Peter Hutterer
92e8dc4961 Use the new input API (changed PreInit function prototype).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-07-22 13:26:38 +10:00
Peter Hutterer
e0e4b7d89b Move private init down.
No real change, preparation for new input API.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-07-22 10:57:34 +10:00
Peter Hutterer
d2c11d36a0 Use pInfo->options instead of dev->commonOptions.
No real change, preparation for new input API.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-07-22 10:57:34 +10:00
Peter Hutterer
2f636402d8 Add ifdefs for pre ABI 12 support.
The server doesn't provide these defines anymore, define them here for
future use. To be purged whenever we drop support for the current server.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-07-22 10:57:34 +10:00
Peter Hutterer
3d3565c069 Remove usage of XI86_POINTER_CAPABLE and XI86_KEYBOARD_CAPABLE.
XI86_KEYBOARD_CAPABLE was write-only, both in the driver and the server.
XI86_POINTER_CAPABLE was write-only in the server and can be emulated with
has_abs_axes and has_rel_axes.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-07-22 10:57:34 +10:00
11 changed files with 2158 additions and 963 deletions

View File

@@ -23,7 +23,7 @@
# Initialize Autoconf
AC_PREREQ([2.60])
AC_INIT([xf86-input-evdev],
[2.5.0],
[2.7.0],
[https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
[xf86-input-evdev])
AC_CONFIG_SRCDIR([Makefile.am])
@@ -45,7 +45,18 @@ XORG_MACROS_VERSION(1.8)
XORG_DEFAULT_OPTIONS
# Obtain compiler/linker options from server and required extensions
PKG_CHECK_MODULES(XORG, xorg-server xproto inputproto)
PKG_CHECK_MODULES(XORG, [xorg-server >= 1.10] xproto inputproto)
PKG_CHECK_MODULES(UDEV, libudev)
PKG_CHECK_MODULES(XI22, [inputproto >= 2.1.99.3] [xorg-server >= 1.11.99.901], HAVE_XI22="yes", HAVE_XI22="no")
if test "x$HAVE_XI22" = xyes; then
# Obtain compiler/linker options for mtdev
PKG_CHECK_MODULES(MTDEV, mtdev, HAVE_MTDEV="yes", HAVE_MTDEV="no")
fi
if test "x$HAVE_XI22" = xyes && test "x$HAVE_MTDEV" = xyes; then
AC_DEFINE(MULTITOUCH, 1, [XI2.2 available])
fi
# Define a configure option for an alternate input module directory
AC_ARG_WITH(xorg-module-dir,

View File

@@ -66,4 +66,25 @@
/* BOOL */
#define EVDEV_PROP_SWAP_AXES "Evdev Axes Swap"
/* BOOL */
#define EVDEV_PROP_THIRDBUTTON "Evdev Third Button Emulation"
/* CARD32 */
#define EVDEV_PROP_THIRDBUTTON_TIMEOUT "Evdev Third Button Emulation Timeout"
/* CARD8 */
#define EVDEV_PROP_THIRDBUTTON_BUTTON "Evdev Third Button Emulation Button"
/* CARD32 */
#define EVDEV_PROP_THIRDBUTTON_THRESHOLD "Evdev Third Button Emulation Threshold"
/* CARD8, 1 value,
This property is initialized on devices that have multimedia keys on the
function keys. The value of the property selects the default behaviour
for the function keys. The behaviour of the fn key (if any exists) is
hardware specific. On some hardware, fn may toggle the other set of
functions available on the keys.
0 send functions keys by default, fn may toggle to multimedia keys
1 send multimedia keys by default, fn may toggle to function keys
*/
#define EVDEV_PROP_FUNCTION_KEYS "Evdev Function Keys"
#endif

View File

@@ -66,7 +66,8 @@ is used. Buttons not specified in the user's mapping use the default mapping.
.BI "Option \*qDevice\*q \*q" string \*q
Specifies the device through which the device can be accessed. This will
generally be of the form \*q/dev/input/eventX\*q, where X is some integer.
The mapping from device node to hardware is system-dependent.
The mapping from device node to hardware is system-dependent. Property:
"Device Node" (read-only).
.TP 7
.BI "Option \*qDragLockButtons\*q \*q" "L1 B2 L3 B4" \*q
Sets \*qdrag lock buttons\*q that simulate holding a button down, so
@@ -133,6 +134,31 @@ must be pressed before wheel emulation is started. If the
is released before this timeout, the original button press/release event
is sent. Default: 200. Property: "Evdev Wheel Emulation Timeout".
.TP 7
.BI "Option \*qEmulateThirdButton\*q \*q" boolean \*q
Enable third button emulation. Third button emulation emits a right button
event (by default) by pressing and holding the first button. The first
button must be held down for the configured timeout and must not move more
than the configured threshold for the emulation to activate. Otherwise, the
first button event is posted as normal. Default: off. Property: "Evdev
Third Button Emulation".
.TP 7
.BI "Option \*qEmulateThirdButtonTimeout\*q \*q" integer \*q
Specifies the timeout in milliseconds between the initial button press and
the generation of the emulated button event.
Default: 1000. Property: "Evdev Third Button Emulation Timeout".
.TP 7
.BI "Option \*qEmulateThirdButtonButton\*q \*q" integer \*q
Specifies the physical button number to be emitted if third button emulation
is triggered.
Default: 3. Property: "Evdev Third Button Button".
.TP 7
.BI "Option \*qEmulateThirdButtonMoveThreshold\*q \*q" integer \*q
Specifies the maximum move fuzz in device coordinates for third button
emulation. If the device moves by more than this threshold before the third
button emulation is triggered, the emulation is cancelled and a first button
event is generated as normal.
Default: 20. Property: "Evdev Third Button Emulation Threshold".
.TP 7
.BI "Option \*qGrabDevice\*q \*q" boolean \*q
Force a grab on the event device. Doing so will ensure that no other driver
can initialise the same device and it will also stop the device from sending

View File

@@ -30,11 +30,14 @@ AM_CPPFLAGS =-I$(top_srcdir)/include
@DRIVER_NAME@_drv_la_LTLIBRARIES = @DRIVER_NAME@_drv.la
@DRIVER_NAME@_drv_la_LDFLAGS = -module -avoid-version
@DRIVER_NAME@_drv_la_LIBADD = $(MTDEV_LIBS)
@DRIVER_NAME@_drv_ladir = @inputdir@
@DRIVER_NAME@_drv_la_SOURCES = @DRIVER_NAME@.c \
@DRIVER_NAME@.h \
emuMB.c \
emuThird.c \
emuWheel.c \
draglock.c
draglock.c \
apple.c

312
src/apple.c Normal file
View File

@@ -0,0 +1,312 @@
/*
* Copyright © 2011 Red Hat, Inc.
*
* Permission to use, copy, modify, distribute, and sell this software
* and its documentation for any purpose is hereby granted without
* fee, provided that the above copyright notice appear in all copies
* and that both that copyright notice and this permission notice
* appear in supporting documentation, and that the name of Red Hat
* not be used in advertising or publicity pertaining to distribution
* of the software without specific, written prior permission. Red
* Hat makes no representations about the suitability of this software
* for any purpose. It is provided "as is" without express or implied
* warranty.
*
* THE AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
* OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* Authors:
* Peter Hutterer (peter.hutterer@redhat.com)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <evdev.h>
#include <evdev-properties.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <exevents.h>
#include <xf86.h>
#include <xf86Xinput.h>
#include <X11/Xatom.h>
/* Apple-specific controls.
*
* On Apple keyboards, the multimedia function keys are overlaid with the F
* keys. F1 is also BrightnessDown, F10 is Mute, etc. The kernel provides a
* tweak to enable/disable this.
*
* /sys/module/hid_apple/parameters/fnmode
* 0 .. keyboard sends Fx keys, fn is disabled
* 1 .. keyboard sends multimedia keys, fn sends Fx keys
* 2 .. keyboard sends Fx keys, fn sends multimedia keys
*
* We only handle 1 and 2, don't care about 0. If fnmode is found to be on
* 0, we force it to 2 instead.
*/
/* In this file: fkeymode refers to the evdev-specific enums and parameters,
* fnmode refers to the fnmode parameter exposed by the kernel. fnmode is
* apple-specific */
#define FNMODE_PATH "/sys/module/hid_apple/parameters/fnmode"
/* Taken from the kernel */
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_ALU_MINI_ANSI 0x021d
#define USB_DEVICE_ID_APPLE_ALU_MINI_ISO 0x021e
#define USB_DEVICE_ID_APPLE_ALU_MINI_JIS 0x021f
#define USB_DEVICE_ID_APPLE_ALU_ANSI 0x0220
#define USB_DEVICE_ID_APPLE_ALU_ISO 0x0221
#define USB_DEVICE_ID_APPLE_ALU_JIS 0x0222
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI 0x022c
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO 0x022d
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS 0x022e
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
static int EvdevAppleGetProperty (DeviceIntPtr dev, Atom property);
static int EvdevAppleSetProperty(DeviceIntPtr dev, Atom atom,
XIPropertyValuePtr val, BOOL checkonly);
static Atom prop_fkeymode;
static Bool fnmode_readonly; /* set if we can only read fnmode */
struct product_table
{
unsigned int vendor;
unsigned int product;
} apple_keyboard_table[] = {
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_ANSI},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_ISO},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_MINI_JIS},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO},
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS},
{ 0, 0}
};
/**
* @return TRUE if the device matches a product in the given product table,
* FALSE otherwise
*/
static Bool product_check(const struct product_table *t, int vendor, int product)
{
while (t->vendor)
{
if (vendor == t->vendor && product == t->product)
return TRUE;
t++;
}
return FALSE;
}
/**
* @return 0 on success, -1 otherwise (check errno)
*/
static int
set_fnmode(enum fkeymode fkeymode)
{
int fd;
char mode;
int bytes_written;
if (fkeymode == FKEYMODE_UNKNOWN)
{
errno = EINVAL; /* silly you */
return -1;
}
fd = open(FNMODE_PATH, O_WRONLY);
if (fd < 0)
return -1;
mode = (fkeymode == FKEYMODE_FKEYS) ? '2' : '1';
bytes_written = write(fd, &mode, 1);
close(fd);
return (bytes_written == 1) ? 0 : -1;
}
/**
* Get the current value of fnmode. If fnmode is found to be on 0, we set it
* to 2 in the process. Yes, quite daring, I know. I live on the edge.
*
* @return The current setting of fnmode or FKEYMODE_UNKNOWN on error (check
* errno)
*/
static enum fkeymode
get_fnmode(void)
{
int fd;
char retvalue;
fd = open(FNMODE_PATH, O_RDWR);
if (fd < 0 && errno == EACCES)
{
fnmode_readonly = TRUE;
fd = open(FNMODE_PATH, O_RDONLY);
}
if (fd < 0)
goto err;
if (read(fd, &retvalue, 1) != 1)
goto err;
if (retvalue != '0' && retvalue != '1' && retvalue != '2')
{
xf86Msg(X_ERROR, "Invalid fnmode value: %c\n", retvalue);
errno = EINVAL;
goto err;
}
close(fd);
/* we don't want 0, switch to 2 */
if (retvalue == '0')
{
if (fnmode_readonly)
xf86Msg(X_WARNING, "fnmode is disabled and read-only. Fn key will"
"not toggle to multimedia keys.\n");
else
set_fnmode(FKEYMODE_FKEYS);
}
return retvalue == '1' ? FKEYMODE_MMKEYS : FKEYMODE_FKEYS;
err:
if (fd >= 0)
close(fd);
return FKEYMODE_UNKNOWN;
}
/**
* Set the property value to fkeymode. If the property doesn't exist,
* initialize it.
*/
static void set_fkeymode_property(InputInfoPtr pInfo, enum fkeymode fkeymode)
{
DeviceIntPtr dev = pInfo->dev;
BOOL init = FALSE;
char data;
switch(fkeymode)
{
case FKEYMODE_FKEYS: data = 0; break;
case FKEYMODE_MMKEYS: data = 1; break;
case FKEYMODE_UNKNOWN:
xf86IDrvMsg(pInfo, X_ERROR, "Failed to get fnmode (%s)\n", strerror(errno));
return;
}
if (!prop_fkeymode) {
init = TRUE;
prop_fkeymode = MakeAtom(EVDEV_PROP_FUNCTION_KEYS, strlen(EVDEV_PROP_FUNCTION_KEYS), TRUE);
}
/* Don't send an event if we're initializing the property */
XIChangeDeviceProperty(dev, prop_fkeymode, XA_INTEGER, 8,
PropModeReplace, 1, &data, !init);
if (init)
{
XISetDevicePropertyDeletable(dev, prop_fkeymode, FALSE);
XIRegisterPropertyHandler(dev, EvdevAppleSetProperty, EvdevAppleGetProperty, NULL);
}
}
/**
* Called when a client reads the property state.
* Update with current kernel state, it may have changed behind our back.
*/
static int
EvdevAppleGetProperty (DeviceIntPtr dev, Atom property)
{
if (property == prop_fkeymode)
{
InputInfoPtr pInfo = dev->public.devicePrivate;
EvdevPtr pEvdev = pInfo->private;
enum fkeymode fkeymode;
fkeymode = get_fnmode();
if (fkeymode != pEvdev->fkeymode) {
/* set internal copy first, so we don't write to the file in
* SetProperty handler */
pEvdev->fkeymode = fkeymode;
set_fkeymode_property(pInfo, fkeymode);
}
}
return Success;
}
static int
EvdevAppleSetProperty(DeviceIntPtr dev, Atom atom,
XIPropertyValuePtr val, BOOL checkonly)
{
InputInfoPtr pInfo = dev->public.devicePrivate;
EvdevPtr pEvdev = pInfo->private;
if (atom == prop_fkeymode)
{
CARD8 v = *(CARD8*)val->data;
if (val->format != 8 || val->type != XA_INTEGER)
return BadMatch;
if (fnmode_readonly)
return BadAccess;
if (v > 1)
return BadValue;
if (!checkonly)
{
if ((!v && pEvdev->fkeymode != FKEYMODE_FKEYS) ||
(v && pEvdev->fkeymode != FKEYMODE_MMKEYS))
{
pEvdev->fkeymode = v ? FKEYMODE_MMKEYS : FKEYMODE_FKEYS;
set_fnmode(pEvdev->fkeymode);
}
}
}
return Success;
}
void
EvdevAppleInitProperty(DeviceIntPtr dev)
{
InputInfoPtr pInfo = dev->public.devicePrivate;
EvdevPtr pEvdev = pInfo->private;
enum fkeymode fkeymode;
if (!product_check(apple_keyboard_table,
pEvdev->id_vendor, pEvdev->id_product))
return;
fkeymode = get_fnmode();
pEvdev->fkeymode = fkeymode;
set_fkeymode_property(pInfo, fkeymode);
}

View File

@@ -44,9 +44,7 @@
#include <evdev-properties.h>
#ifdef HAVE_PROPERTIES
static Atom prop_dlock = 0; /* Drag lock buttons. */
#endif
void EvdevDragLockLockButton(InputInfoPtr pInfo, unsigned int button);
@@ -105,13 +103,12 @@ EvdevDragLockPreInit(InputInfoPtr pInfo)
/* We only have a meta button */
pEvdev->dragLock.meta = meta_button;
xf86Msg(X_CONFIG, "%s: DragLockButtons : "
"%i as meta\n",
pInfo->name, meta_button);
xf86IDrvMsg(pInfo, X_CONFIG, "DragLockButtons : "
"%i as meta\n", meta_button);
} else {
xf86Msg(X_ERROR, "%s: DragLockButtons : "
"Incomplete pair specifying button pairs %s\n",
pInfo->name, option_string);
xf86IDrvMsg(pInfo, X_ERROR, "DragLockButtons : "
"Incomplete pair specifying button pairs %s\n",
option_string);
}
} else {
@@ -119,23 +116,24 @@ EvdevDragLockPreInit(InputInfoPtr pInfo)
if ((meta_button <= EVDEV_MAXBUTTONS) && (meta_button >= 0 ) &&
(lock_button <= EVDEV_MAXBUTTONS) && (lock_button >= 0)) {
xf86Msg(X_CONFIG, "%s: DragLockButtons : %i -> %i\n",
pInfo->name, meta_button, lock_button);
xf86IDrvMsg(pInfo, X_CONFIG,
"DragLockButtons : %i -> %i\n",
meta_button, lock_button);
pEvdev->dragLock.lock_pair[meta_button - 1] = lock_button;
pairs=TRUE;
} else {
/* Let the user know something was wrong
with this pair of buttons */
xf86Msg(X_CONFIG, "%s: DragLockButtons : "
"Invalid button pair %i -> %i\n",
pInfo->name, meta_button, lock_button);
xf86IDrvMsg(pInfo, X_CONFIG,"DragLockButtons : "
"Invalid button pair %i -> %i\n",
meta_button, lock_button);
}
}
} else {
xf86Msg(X_ERROR, "%s: Found DragLockButtons "
"with invalid lock button string : '%s'\n",
pInfo->name, option_string);
xf86IDrvMsg(pInfo, X_ERROR, "Found DragLockButtons "
"with invalid lock button string : '%s'\n",
option_string);
/* This should be the case anyhow, just make sure */
next_num = NULL;
@@ -211,7 +209,6 @@ EvdevDragLockFilterEvent(InputInfoPtr pInfo, unsigned int button, int value)
return FALSE;
}
#ifdef HAVE_PROPERTIES
/**
* Set the drag lock property.
* If only one value is supplied, then this is used as the meta button.
@@ -319,5 +316,3 @@ EvdevDragLockInitProperty(DeviceIntPtr dev)
XIRegisterPropertyHandler(dev, EvdevDragLockSetProperty, NULL, NULL);
}
#endif

View File

@@ -43,10 +43,8 @@
#include <evdev-properties.h>
#ifdef HAVE_PROPERTIES
static Atom prop_mbemu = 0; /* Middle button emulation on/off property */
static Atom prop_mbtimeout = 0; /* Middle button timeout property */
#endif
/*
* Lets create a simple finite-state machine for 3 button emulation:
*
@@ -193,7 +191,8 @@ EvdevMBEmuTimer(InputInfoPtr pInfo)
pEvdev->emulateMB.pending = FALSE;
if ((id = stateTab[pEvdev->emulateMB.state][4][0]) != 0) {
EvdevPostButtonEvent(pInfo, abs(id), (id >= 0));
EvdevPostButtonEvent(pInfo, abs(id),
(id >= 0) ? BUTTON_PRESS : BUTTON_RELEASE);
pEvdev->emulateMB.state =
stateTab[pEvdev->emulateMB.state][4][2];
} else {
@@ -330,7 +329,6 @@ EvdevMBEmuFinalize(InputInfoPtr pInfo)
}
#ifdef HAVE_PROPERTIES
static int
EvdevMBEmuSetProperty(DeviceIntPtr dev, Atom atom, XIPropertyValuePtr val,
BOOL checkonly)
@@ -391,4 +389,3 @@ EvdevMBEmuInitProperty(DeviceIntPtr dev)
XIRegisterPropertyHandler(dev, EvdevMBEmuSetProperty, NULL, NULL);
}
#endif

416
src/emuThird.c Normal file
View File

@@ -0,0 +1,416 @@
/*
* Copyright © 2011 Red Hat, Inc.
*
* Permission to use, copy, modify, distribute, and sell this software
* and its documentation for any purpose is hereby granted without
* fee, provided that the above copyright notice appear in all copies
* and that both that copyright notice and this permission notice
* appear in supporting documentation, and that the name of the authors
* not be used in advertising or publicity pertaining to distribution of the
* software without specific, written prior permission. The authors make no
* representations about the suitability of this software for any
* purpose. It is provided "as is" without express or implied
* warranty.
*
* THE AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
* OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
* NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
/* Right mouse button emulation code.
* Emulates a right button event if the first button is held down for a
* timeout. If the device moves more than a certain amount before the
* timeout is over, the emulation is cancelled and a normal button event is
* generated.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "evdev.h"
#include <X11/Xatom.h>
#include <xf86.h>
#include <xf86Xinput.h>
#include <exevents.h>
#include <evdev-properties.h>
/* Threshold (in device coordinates) for devices to cancel emulation */
#define DEFAULT_MOVE_THRESHOLD 20
static Atom prop_3bemu; /* Right button emulation on/off property */
static Atom prop_3btimeout; /* Right button timeout property */
static Atom prop_3bbutton; /* Right button target physical button */
static Atom prop_3bthreshold; /* Right button move cancellation threshold */
/* State machine for 3rd button emulation */
enum EmulationState {
EM3B_OFF, /* no event */
EM3B_PENDING, /* timer pending */
EM3B_EMULATING /* in emulation */
};
static void
Evdev3BEmuPostButtonEvent(InputInfoPtr pInfo, int button, enum ButtonAction act)
{
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
int absolute = Relative;
/* if we cancel, emit the button down event at our start position,
* not at the current position. Only for absolute devices though. For
* relative events, this may be a bit iffy since pointer accel may shoot
* us back more than we moved and confuse the user.
*/
if (emu3B->flags & EVDEV_ABSOLUTE_EVENTS)
absolute = Absolute;
xf86PostButtonEventP(pInfo->dev, absolute, button,
(act == BUTTON_PRESS) ? 1 : 0, 0,
(absolute ? 2 : 0), emu3B->startpos);
}
/**
* Timer function. Post a button down event to the server.
*
* @param arg The InputInfoPtr for this device.
*/
CARD32
Evdev3BEmuTimer(OsTimerPtr timer, CARD32 time, pointer arg)
{
InputInfoPtr pInfo = (InputInfoPtr)arg;
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
int sigstate = 0;
sigstate = xf86BlockSIGIO ();
emu3B->state = EM3B_EMULATING;
Evdev3BEmuPostButtonEvent(pInfo, emu3B->button, BUTTON_PRESS);
xf86UnblockSIGIO (sigstate);
return 0;
}
/**
* Cancel all emulation, reset the timer and reset deltas.
*/
static void
Evdev3BCancel(InputInfoPtr pInfo)
{
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
if (emu3B->state != EM3B_OFF)
{
TimerCancel(emu3B->timer);
emu3B->state = EM3B_OFF;
memset(emu3B->delta, 0, sizeof(emu3B->delta));
}
emu3B->flags = 0;
}
/**
* Emulate a third button on button press. Note that emulation only triggers
* on button 1.
*
* Return TRUE if event was swallowed by middle mouse button emulation,
* FALSE otherwise.
*/
BOOL
Evdev3BEmuFilterEvent(InputInfoPtr pInfo, int button, BOOL press)
{
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
int ret = FALSE;
if (!emu3B->enabled)
goto out;
if (press)
emu3B->buttonstate |= button;
else
emu3B->buttonstate &= ~button;
/* Any other button pressed? Cancel timer */
if (button != 1)
{
switch (emu3B->state)
{
case EM3B_PENDING:
Evdev3BEmuPostButtonEvent(pInfo, 1, BUTTON_PRESS);
Evdev3BCancel(pInfo);
break;
case EM3B_EMULATING:
/* We're emulating and now the user pressed a different
* button. Just release the emulating one, tell the user to
* not do that and get on with life */
Evdev3BEmuPostButtonEvent(pInfo, emu3B->button, BUTTON_RELEASE);
Evdev3BCancel(pInfo);
break;
default:
break;
}
goto out;
}
/* Don't emulate if any other button is down */
if ((emu3B->buttonstate & ~0x1) != 0)
goto out;
/* Release event → cancel, send press and release now. */
if (!press)
{
switch(emu3B->state)
{
case EM3B_PENDING:
Evdev3BEmuPostButtonEvent(pInfo, 1, BUTTON_PRESS);
Evdev3BCancel(pInfo);
break;
case EM3B_EMULATING:
Evdev3BEmuPostButtonEvent(pInfo, emu3B->button, BUTTON_RELEASE);
Evdev3BCancel(pInfo);
ret = TRUE;
break;
default:
break;
}
goto out;
}
if (press && emu3B->state == EM3B_OFF)
{
emu3B->state = EM3B_PENDING;
emu3B->timer = TimerSet(emu3B->timer, 0, emu3B->timeout,
Evdev3BEmuTimer, pInfo);
ret = TRUE;
goto out;
}
out:
return ret;
}
/**
* Handle absolute x/y motion. If the motion is above the threshold, cancel
* emulation.
*/
void
Evdev3BEmuProcessAbsMotion(InputInfoPtr pInfo, ValuatorMask *vals)
{
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
int cancel = FALSE;
int axis = 0;
if (emu3B->state != EM3B_PENDING)
{
if (valuator_mask_isset(vals, 0))
emu3B->startpos[0] = valuator_mask_get(vals, 0);
if (valuator_mask_isset(vals, 1))
emu3B->startpos[1] = valuator_mask_get(vals, 1);
return;
}
if ((emu3B->flags & EVDEV_ABSOLUTE_EVENTS) == 0)
emu3B->flags |= EVDEV_ABSOLUTE_EVENTS;
while (axis <= 1 && !cancel)
{
if (valuator_mask_isset(vals, axis))
{
int delta = valuator_mask_get(vals, axis) - emu3B->startpos[axis];
if (abs(delta) > emu3B->threshold)
cancel = TRUE;
}
axis++;
}
if (cancel)
{
Evdev3BEmuPostButtonEvent(pInfo, 1, BUTTON_PRESS);
Evdev3BCancel(pInfo);
}
}
/**
* Handle relative x/y motion. If the motion is above the threshold, cancel
* emulation.
*/
void
Evdev3BEmuProcessRelMotion(InputInfoPtr pInfo, int dx, int dy)
{
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
if (emu3B->state != EM3B_PENDING)
return;
emu3B->delta[0] += dx;
emu3B->delta[1] += dy;
emu3B->flags |= EVDEV_RELATIVE_EVENTS;
if (abs(emu3B->delta[0]) > emu3B->threshold ||
abs(emu3B->delta[1]) > emu3B->threshold)
{
Evdev3BEmuPostButtonEvent(pInfo, 1, BUTTON_PRESS);
Evdev3BCancel(pInfo);
}
}
void
Evdev3BEmuPreInit(InputInfoPtr pInfo)
{
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
emu3B->enabled = xf86SetBoolOption(pInfo->options,
"EmulateThirdButton",
FALSE);
emu3B->timeout = xf86SetIntOption(pInfo->options,
"EmulateThirdButtonTimeout",
1000);
emu3B->button = xf86SetIntOption(pInfo->options,
"EmulateThirdButtonButton",
3);
/* FIXME: this should be auto-configured based on axis ranges */
emu3B->threshold = xf86SetIntOption(pInfo->options,
"EmulateThirdButtonMoveThreshold",
DEFAULT_MOVE_THRESHOLD);
/* allocate now so we don't allocate in the signal handler */
emu3B->timer = TimerSet(NULL, 0, 0, NULL, NULL);
}
void
Evdev3BEmuOn(InputInfoPtr pInfo)
{
/* This function just exists for symmetry in evdev.c */
}
void
Evdev3BEmuFinalize(InputInfoPtr pInfo)
{
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
TimerFree(emu3B->timer);
emu3B->timer = NULL;
}
static int
Evdev3BEmuSetProperty(DeviceIntPtr dev, Atom atom, XIPropertyValuePtr val,
BOOL checkonly)
{
InputInfoPtr pInfo = dev->public.devicePrivate;
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
if (atom == prop_3bemu)
{
if (val->format != 8 || val->size != 1 || val->type != XA_INTEGER)
return BadMatch;
if (!checkonly)
emu3B->enabled = *((BOOL*)val->data);
} else if (atom == prop_3btimeout)
{
if (val->format != 32 || val->size != 1 || val->type != XA_INTEGER)
return BadMatch;
if (!checkonly)
emu3B->timeout = *((CARD32*)val->data);
} else if (atom == prop_3bbutton)
{
if (val->format != 8 || val->size != 1 || val->type != XA_INTEGER)
return BadMatch;
if (!checkonly)
emu3B->button = *((CARD8*)val->data);
} else if (atom == prop_3bthreshold)
{
if (val->format != 32 || val->size != 1 || val->type != XA_INTEGER)
return BadMatch;
if (!checkonly)
emu3B->threshold = *((CARD32*)val->data);
}
return Success;
}
/**
* Initialise properties for third button emulation
*/
void
Evdev3BEmuInitProperty(DeviceIntPtr dev)
{
InputInfoPtr pInfo = dev->public.devicePrivate;
EvdevPtr pEvdev = pInfo->private;
struct emulate3B *emu3B = &pEvdev->emulate3B;
int rc;
if (!dev->button) /* don't init prop for keyboards */
return;
/* third button emulation on/off */
prop_3bemu = MakeAtom(EVDEV_PROP_THIRDBUTTON, strlen(EVDEV_PROP_THIRDBUTTON), TRUE);
rc = XIChangeDeviceProperty(dev, prop_3bemu, XA_INTEGER, 8,
PropModeReplace, 1,
&emu3B->enabled,
FALSE);
if (rc != Success)
return;
XISetDevicePropertyDeletable(dev, prop_3bemu, FALSE);
/* third button emulation timeout */
prop_3btimeout = MakeAtom(EVDEV_PROP_THIRDBUTTON_TIMEOUT,
strlen(EVDEV_PROP_THIRDBUTTON_TIMEOUT),
TRUE);
rc = XIChangeDeviceProperty(dev, prop_3btimeout, XA_INTEGER, 32, PropModeReplace, 1,
&emu3B->timeout, FALSE);
if (rc != Success)
return;
XISetDevicePropertyDeletable(dev, prop_3btimeout, FALSE);
/* third button emulation button to be triggered */
prop_3bbutton = MakeAtom(EVDEV_PROP_THIRDBUTTON_BUTTON,
strlen(EVDEV_PROP_THIRDBUTTON_BUTTON),
TRUE);
rc = XIChangeDeviceProperty(dev, prop_3bbutton, XA_INTEGER, 8, PropModeReplace, 1,
&emu3B->button, FALSE);
if (rc != Success)
return;
XISetDevicePropertyDeletable(dev, prop_3bbutton, FALSE);
/* third button emulation movement threshold */
prop_3bthreshold = MakeAtom(EVDEV_PROP_THIRDBUTTON_THRESHOLD,
strlen(EVDEV_PROP_THIRDBUTTON_THRESHOLD),
TRUE);
rc = XIChangeDeviceProperty(dev, prop_3bthreshold, XA_INTEGER, 32, PropModeReplace, 1,
&emu3B->threshold, FALSE);
if (rc != Success)
return;
XISetDevicePropertyDeletable(dev, prop_3bthreshold, FALSE);
XIRegisterPropertyHandler(dev, Evdev3BEmuSetProperty, NULL, NULL);
}

View File

@@ -44,13 +44,11 @@
#define WHEEL_NOT_CONFIGURED 0
#ifdef HAVE_PROPERTIES
static Atom prop_wheel_emu = 0;
static Atom prop_wheel_axismap = 0;
static Atom prop_wheel_inertia = 0;
static Atom prop_wheel_timeout = 0;
static Atom prop_wheel_button = 0;
#endif
/* Local Funciton Prototypes */
static BOOL EvdevWheelEmuHandleButtonMap(InputInfoPtr pInfo, WheelAxisPtr pAxis, char *axis_name);
@@ -120,8 +118,9 @@ EvdevWheelEmuFilterMotion(InputInfoPtr pInfo, struct input_event *pEv)
/* We don't want to intercept real mouse wheel events */
if(pEv->type == EV_ABS) {
oldValue = pEvdev->vals[pEvdev->axis_map[pEv->code]];
pEvdev->vals[pEvdev->axis_map[pEv->code]] = value;
int axis = pEvdev->axis_map[pEv->code];
oldValue = valuator_mask_get(pEvdev->vals, axis);
valuator_mask_set(pEvdev->vals, axis, value);
value -= oldValue; /* make value into a differential measurement */
}
@@ -230,14 +229,14 @@ EvdevWheelEmuHandleButtonMap(InputInfoPtr pInfo, WheelAxisPtr pAxis, char* axis_
if (down_button > pEvdev->num_buttons) pEvdev->num_buttons = down_button;
} else {
xf86Msg(X_WARNING, "%s: Invalid %s value:\"%s\"\n",
pInfo->name, axis_name, option_string);
xf86IDrvMsg(pInfo, X_WARNING, "Invalid %s value:\"%s\"\n",
axis_name, option_string);
}
free(option_string);
/* Clean up and log what happened */
if (msg) {
xf86Msg(X_CONFIG, "%s: %s: %s\n",pInfo->name, axis_name, msg);
xf86IDrvMsg(pInfo, X_CONFIG, "%s: %s\n", axis_name, msg);
free(msg);
return TRUE;
}
@@ -250,14 +249,10 @@ void
EvdevWheelEmuPreInit(InputInfoPtr pInfo)
{
EvdevPtr pEvdev = (EvdevPtr)pInfo->private;
char val[4];
int wheelButton;
int inertia;
int timeout;
val[0] = 0;
val[1] = 0;
if (xf86SetBoolOption(pInfo->options, "EmulateWheel", FALSE)) {
pEvdev->emulateWheel.enabled = TRUE;
} else
@@ -266,9 +261,9 @@ EvdevWheelEmuPreInit(InputInfoPtr pInfo)
wheelButton = xf86SetIntOption(pInfo->options, "EmulateWheelButton", 4);
if ((wheelButton < 0) || (wheelButton > EVDEV_MAXBUTTONS)) {
xf86Msg(X_WARNING, "%s: Invalid EmulateWheelButton value: %d\n",
pInfo->name, wheelButton);
xf86Msg(X_WARNING, "%s: Wheel emulation disabled.\n", pInfo->name);
xf86IDrvMsg(pInfo, X_WARNING, "Invalid EmulateWheelButton value: %d\n",
wheelButton);
xf86IDrvMsg(pInfo, X_WARNING, "Wheel emulation disabled.\n");
pEvdev->emulateWheel.enabled = FALSE;
}
@@ -278,10 +273,9 @@ EvdevWheelEmuPreInit(InputInfoPtr pInfo)
inertia = xf86SetIntOption(pInfo->options, "EmulateWheelInertia", 10);
if (inertia <= 0) {
xf86Msg(X_WARNING, "%s: Invalid EmulateWheelInertia value: %d\n",
pInfo->name, inertia);
xf86Msg(X_WARNING, "%s: Using built-in inertia value.\n",
pInfo->name);
xf86IDrvMsg(pInfo, X_WARNING, "Invalid EmulateWheelInertia value: %d\n",
inertia);
xf86IDrvMsg(pInfo, X_WARNING, "Using built-in inertia value.\n");
inertia = 10;
}
@@ -291,10 +285,9 @@ EvdevWheelEmuPreInit(InputInfoPtr pInfo)
timeout = xf86SetIntOption(pInfo->options, "EmulateWheelTimeout", 200);
if (timeout < 0) {
xf86Msg(X_WARNING, "%s: Invalid EmulateWheelTimeout value: %d\n",
pInfo->name, timeout);
xf86Msg(X_WARNING, "%s: Using built-in timeout value.\n",
pInfo->name);
xf86IDrvMsg(pInfo, X_WARNING, "Invalid EmulateWheelTimeout value: %d\n",
timeout);
xf86IDrvMsg(pInfo, X_WARNING, "Using built-in timeout value.\n");
timeout = 200;
}
@@ -314,9 +307,9 @@ EvdevWheelEmuPreInit(InputInfoPtr pInfo)
pEvdev->num_buttons = 5;
/* Display default Configuration */
xf86Msg(X_CONFIG, "%s: YAxisMapping: buttons %d and %d\n",
pInfo->name, pEvdev->emulateWheel.Y.up_button,
pEvdev->emulateWheel.Y.down_button);
xf86IDrvMsg(pInfo, X_CONFIG, "YAxisMapping: buttons %d and %d\n",
pEvdev->emulateWheel.Y.up_button,
pEvdev->emulateWheel.Y.down_button);
}
@@ -329,13 +322,13 @@ EvdevWheelEmuPreInit(InputInfoPtr pInfo)
pEvdev->emulateWheel.X.traveled_distance = 0;
pEvdev->emulateWheel.Y.traveled_distance = 0;
xf86Msg(X_CONFIG, "%s: EmulateWheelButton: %d, "
"EmulateWheelInertia: %d, "
"EmulateWheelTimeout: %d\n",
pInfo->name, pEvdev->emulateWheel.button, inertia, timeout);
xf86IDrvMsg(pInfo, X_CONFIG,
"EmulateWheelButton: %d, "
"EmulateWheelInertia: %d, "
"EmulateWheelTimeout: %d\n",
pEvdev->emulateWheel.button, inertia, timeout);
}
#ifdef HAVE_PROPERTIES
static int
EvdevWheelEmuSetProperty(DeviceIntPtr dev, Atom atom, XIPropertyValuePtr val,
BOOL checkonly)
@@ -485,4 +478,3 @@ EvdevWheelEmuInitProperty(DeviceIntPtr dev)
XIRegisterPropertyHandler(dev, EvdevWheelEmuSetProperty, NULL, NULL);
}
#endif

File diff suppressed because it is too large Load Diff

View File

@@ -28,6 +28,10 @@
* Oliver McFadden (oliver.mcfadden@nokia.com)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#ifndef EVDEV_H
#define EVDEV_H
@@ -39,6 +43,10 @@
#include <xf86_OSproc.h>
#include <xkbstr.h>
#ifdef MULTITOUCH
#include <mtdev.h>
#endif
#ifndef EV_CNT /* linux 2.6.23 kernels and earlier lack _CNT defines */
#define EV_CNT (EV_MAX+1)
#endif
@@ -55,6 +63,10 @@
#define LED_CNT (LED_MAX+1)
#endif
#if GET_ABI_MAJOR(ABI_XINPUT_VERSION) >= 14
#define HAVE_SMOOTH_SCROLLING 1
#endif
#define EVDEV_MAXBUTTONS 32
#define EVDEV_MAXQUEUE 32
@@ -72,31 +84,38 @@
#define EVDEV_UNIGNORE_RELATIVE (1 << 10) /* explicitly unignore rel axes */
#define EVDEV_RELATIVE_MODE (1 << 11) /* Force relative events for devices with absolute axes */
#if GET_ABI_MAJOR(ABI_XINPUT_VERSION) >= 3
#define HAVE_PROPERTIES 1
#endif
#ifndef MAX_VALUATORS
#define MAX_VALUATORS 36
#endif
#if GET_ABI_MAJOR(ABI_XINPUT_VERSION) < 5
typedef struct {
char *rules;
char *model;
char *layout;
char *variant;
char *options;
} XkbRMLVOSet;
#ifndef XI_PROP_DEVICE_NODE
#define XI_PROP_DEVICE_NODE "Device Node"
#endif
#define LONG_BITS (sizeof(long) * 8)
/* Number of longs needed to hold the given number of bits */
#define NLONGS(x) (((x) + LONG_BITS - 1) / LONG_BITS)
/* Function key mode */
enum fkeymode {
FKEYMODE_UNKNOWN = 0,
FKEYMODE_FKEYS, /* function keys send function keys */
FKEYMODE_MMKEYS, /* function keys send multimedia keys */
};
enum SlotState {
SLOTSTATE_OPEN = 8,
SLOTSTATE_CLOSE,
SLOTSTATE_UPDATE,
SLOTSTATE_EMPTY,
};
enum ButtonAction {
BUTTON_RELEASE = 0,
BUTTON_PRESS = 1
};
/* axis specific data for wheel emulation */
typedef struct {
int up_button;
@@ -109,34 +128,55 @@ typedef struct {
enum {
EV_QUEUE_KEY, /* xf86PostKeyboardEvent() */
EV_QUEUE_BTN, /* xf86PostButtonEvent() */
EV_QUEUE_PROXIMITY, /* xf86PostProximityEvent() */
#ifdef MULTITOUCH
EV_QUEUE_TOUCH, /*xf86PostTouchEvent() */
#endif
} type;
int key; /* May be either a key code or button number. */
int val; /* State of the key/button; pressed or released. */
union {
int key; /* May be either a key code or button number. */
#ifdef MULTITOUCH
unsigned int touch; /* Touch ID */
#endif
} detail;
int val; /* State of the key/button/touch; pressed or released. */
#ifdef MULTITOUCH
ValuatorMask *touchMask;
#endif
} EventQueueRec, *EventQueuePtr;
typedef struct {
const char *device;
unsigned short id_vendor;
unsigned short id_product;
char *device;
int grabDevice; /* grab the event device? */
int num_vals; /* number of valuators */
int axis_map[max(ABS_CNT, REL_CNT)]; /* Map evdev <axis> to index */
int vals[MAX_VALUATORS];
int old_vals[MAX_VALUATORS]; /* Translate absolute inputs to relative */
ValuatorMask *vals; /* new values coming in */
ValuatorMask *old_vals; /* old values for calculating relative motion */
ValuatorMask *prox; /* last values set while not in proximity */
ValuatorMask *mt_mask;
ValuatorMask **last_mt_vals;
int cur_slot;
enum SlotState slot_state;
#ifdef MULTITOUCH
struct mtdev *mtdev;
#endif
int flags;
int tool;
int in_proximity; /* device in proximity */
int use_proximity; /* using the proximity bit? */
int num_buttons; /* number of buttons */
BOOL swap_axes;
BOOL invert_x;
BOOL invert_y;
int delta[REL_CNT];
unsigned int abs, rel;
unsigned int abs_queued, rel_queued, prox_queued;
/* XKB stuff has to be per-device rather than per-driver */
#if GET_ABI_MAJOR(ABI_XINPUT_VERSION) < 5
XkbComponentNamesRec xkbnames;
#endif
XkbRMLVOSet rmlvo;
/* Middle mouse button emulation */
@@ -148,6 +188,19 @@ typedef struct {
Time expires; /* time of expiry */
Time timeout;
} emulateMB;
/* Third mouse button emulation */
struct emulate3B {
BOOL enabled;
BOOL state; /* current state */
Time timeout; /* timeout until third button press */
int buttonstate; /* phys. button state */
int button; /* phys button to emit */
int threshold; /* move threshold in dev coords */
OsTimerPtr timer;
int delta[2]; /* delta x/y, accumulating */
int startpos[2]; /* starting pos for abs devices */
int flags; /* remember if we had rel or abs movement */
} emulate3B;
struct {
int meta; /* meta key to lock any button */
BOOL meta_state; /* meta_button state */
@@ -193,16 +246,23 @@ typedef struct {
/* Event queue used to defer keyboard/button events until EV_SYN time. */
int num_queue;
EventQueueRec queue[EVDEV_MAXQUEUE];
enum fkeymode fkeymode;
} EvdevRec, *EvdevPtr;
/* Event posting functions */
void EvdevQueueKbdEvent(InputInfoPtr pInfo, struct input_event *ev, int value);
void EvdevQueueButtonEvent(InputInfoPtr pInfo, int button, int value);
void EvdevPostButtonEvent(InputInfoPtr pInfo, int button, int value);
void EvdevQueueProximityEvent(InputInfoPtr pInfo, int value);
#ifdef MULTITOUCH
void EvdevQueueTouchEvent(InputInfoPtr pInfo, unsigned int touch,
ValuatorMask *mask, uint16_t type);
#endif
void EvdevPostButtonEvent(InputInfoPtr pInfo, int button, enum ButtonAction act);
void EvdevQueueButtonClicks(InputInfoPtr pInfo, int button, int count);
void EvdevPostRelativeMotionEvents(InputInfoPtr pInfo, int *num_v, int *first_v,
void EvdevPostRelativeMotionEvents(InputInfoPtr pInfo, int num_v, int first_v,
int v[MAX_VALUATORS]);
void EvdevPostAbsoluteMotionEvents(InputInfoPtr pInfo, int *num_v, int *first_v,
void EvdevPostAbsoluteMotionEvents(InputInfoPtr pInfo, int num_v, int first_v,
int v[MAX_VALUATORS]);
unsigned int EvdevUtilButtonEventToButtonNumber(EvdevPtr pEvdev, int code);
@@ -215,6 +275,15 @@ void EvdevMBEmuPreInit(InputInfoPtr);
void EvdevMBEmuOn(InputInfoPtr);
void EvdevMBEmuFinalize(InputInfoPtr);
/* Third button emulation */
CARD32 Evdev3BEmuTimer(OsTimerPtr timer, CARD32 time, pointer arg);
BOOL Evdev3BEmuFilterEvent(InputInfoPtr, int, BOOL);
void Evdev3BEmuPreInit(InputInfoPtr pInfo);
void Evdev3BEmuOn(InputInfoPtr);
void Evdev3BEmuFinalize(InputInfoPtr);
void Evdev3BEmuProcessRelMotion(InputInfoPtr pInfo, int dx, int dy);
void Evdev3BEmuProcessAbsMotion(InputInfoPtr pInfo, ValuatorMask *vals);
/* Mouse Wheel emulation */
void EvdevWheelEmuPreInit(InputInfoPtr pInfo);
BOOL EvdevWheelEmuFilterButton(InputInfoPtr pInfo, unsigned int button, int value);
@@ -224,9 +293,9 @@ BOOL EvdevWheelEmuFilterMotion(InputInfoPtr pInfo, struct input_event *pEv);
void EvdevDragLockPreInit(InputInfoPtr pInfo);
BOOL EvdevDragLockFilterEvent(InputInfoPtr pInfo, unsigned int button, int value);
#ifdef HAVE_PROPERTIES
void EvdevMBEmuInitProperty(DeviceIntPtr);
void Evdev3BEmuInitProperty(DeviceIntPtr);
void EvdevWheelEmuInitProperty(DeviceIntPtr);
void EvdevDragLockInitProperty(DeviceIntPtr);
#endif
void EvdevAppleInitProperty(DeviceIntPtr);
#endif