xf86-input-libinput 0.3.0

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>

Makefile.am

@@ -19,16 +19,11 @@
 #  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 
 
-# Provide an sdk location that is writable by the evdev module
 DISTCHECK_CONFIGURE_FLAGS = --with-sdkdir='$${includedir}/xorg'
 
-SUBDIRS = src
+SUBDIRS = src man
 MAINTAINERCLEANFILES = ChangeLog INSTALL
 
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = xorg-libinput.pc
-
-
 .PHONY: ChangeLog INSTALL
 
 INSTALL:
@@ -38,3 +33,5 @@ ChangeLog:
 	$(CHANGELOG_CMD)
 
 dist-hook: ChangeLog INSTALL
+
+EXTRA_DIST = conf/99-libinput.conf README.md

README.md

@@ -0,0 +1,55 @@
+xf86-input-libinput - a libinput-based X driver
+===============================================
+
+The official repository for this driver is
+http://cgit.freedesktop.org/xorg/driver/xf86-input-libinput/
+
+This is an X driver based on libinput. It is a thin wrapper around libinput,
+so while it does provide all features that libinput supports it does little
+beyond.
+
+***WARNING: misconfiguration of an X input driver may leave you without
+usable input devices in your X session. Use with caution.***
+
+
+Prerequisites
+-------------
+
+To build, you'll need the X.Org X server SDK (check your distribution for a
+xorg-x11-server-devel package or similar) and libinput (check your
+distribution for libinput-devel or similar).
+
+To get libinput from source, see:
+http://www.freedesktop.org/wiki/Software/libinput/
+
+To build the X server from source:
+http://www.x.org/wiki/Building_the_X_Window_System/
+
+Building
+--------
+
+To build this driver:
+
+    autoreconf -vif
+    ./configure --prefix=$HOME/build
+    make && make install
+
+Note that this assumes the same prefix as used in "Building the X Window
+System" above, adjust as required. If you want a system install, use a
+prefix of */usr*.
+
+Install the default configuration file:
+
+    cp conf/99-libinput.conf /etc/X11/xorg.conf.d/
+
+This will assign this driver to *all* devices. Use with caution.
+
+
+Bugs
+----
+
+Bugs in libinput go to the "libinput" component of wayland:
+https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland
+
+Bugs in this driver go to the "Input/libinput" component of xorg:
+https://bugs.freedesktop.org/enter_bug.cgi?product=xorg

conf/99-libinput.conf

@@ -0,0 +1,6 @@
+# Use the libinput driver for all event devices
+Section "InputClass"
+	Identifier "libinput"
+	Driver "libinput"
+	MatchDevicePath "/dev/input/event*"
+EndSection

configure.ac

@@ -23,7 +23,7 @@
 # Initialize Autoconf
 AC_PREREQ([2.60])
 AC_INIT([xf86-input-libinput],
-        [0.1.1],
+        [0.3.0],
         [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
         [xf86-input-libinput])
 AC_CONFIG_SRCDIR([Makefile.am])
@@ -35,7 +35,7 @@ AM_INIT_AUTOMAKE([foreign dist-bzip2])
 
 # Initialize libtool
 AC_DISABLE_STATIC
-AC_PROG_LIBTOOL
+LT_INIT
 
 # Initialize X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS
 m4_ifndef([XORG_MACROS_VERSION], 
@@ -45,7 +45,7 @@ XORG_DEFAULT_OPTIONS
 
 # Obtain compiler/linker options from server and required extensions
 PKG_CHECK_MODULES(XORG, [xorg-server >= 1.10] xproto [inputproto >= 2.2])
-PKG_CHECK_MODULES(LIBINPUT, [libinput >= 0.4.0])
+PKG_CHECK_MODULES(LIBINPUT, [libinput >= 0.6.0])
 
 # Define a configure option for an alternate input module directory
 AC_ARG_WITH(xorg-module-dir,
@@ -56,8 +56,7 @@ AC_ARG_WITH(xorg-module-dir,
 inputdir=${moduledir}/input
 AC_SUBST(inputdir)
 
-# X Server SDK location is required to install evdev header files
-# This location is also relayed in the xorg-evdev.pc file
+# X Server SDK location is required to install header files
 sdkdir=`$PKG_CONFIG --variable=sdkdir xorg-server`
 
 # Workaround overriding sdkdir to be able to create a tarball when user has no
@@ -69,6 +68,6 @@ DRIVER_NAME=libinput
 AC_SUBST([DRIVER_NAME])
 
 AC_CONFIG_FILES([Makefile
-                 src/Makefile
-                 xorg-libinput.pc])
+		 src/Makefile
+		 man/Makefile])
 AC_OUTPUT

man/Makefile.am

@@ -0,0 +1,37 @@
+# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice (including the next
+# paragraph) shall be included in all copies or substantial portions of the
+# Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+# 
+
+drivermandir = $(DRIVER_MAN_DIR)
+
+driverman_PRE = $(DRIVER_NAME).man
+
+driverman_DATA = $(driverman_PRE:man=$(DRIVER_MAN_SUFFIX))
+
+EXTRA_DIST = $(DRIVER_NAME).man
+
+CLEANFILES = $(driverman_DATA)
+
+SUFFIXES = .$(DRIVER_MAN_SUFFIX) .man
+
+# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
+.man.$(DRIVER_MAN_SUFFIX):
+	$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@

man/libinput.man

@@ -0,0 +1,115 @@
+.\" shorthand for double quote that works everywhere.
+.ds q \N'34'
+.TH LIBINPUT __drivermansuffix__ __vendorversion__
+.SH NAME
+libinput \- libinput-based X.Org input driver
+.SH SYNOPSIS
+.nf
+.B "Section \*qInputDevice\*q"
+.BI "  Identifier \*q" devname \*q
+.B  "  Driver \*qlibinput\*q"
+.BI "  Option \*qDevice\*q   \*q" devpath \*q
+\ \ ...
+.B EndSection
+.fi
+.SH NOTE
+This is the man page for the X input driver. If you are looking for the
+library documentation, go to 
+.BI http://wayland.freedesktop.org/libinput/doc/
+
+.SH DESCRIPTION
+.B libinput 
+is an __xservername__ input driver based on libinput.  It
+therefore supports all input devices that libinput can handle, including
+most mice, keyboards, tablets and touchscreens.
+.PP
+It is recommended that
+.B libinput
+devices are configured through the
+.B InputClass
+directive (refer to __xconfigfile__(__filemansuffix__)) instead of manual
+per-device configuration. Devices configured in the
+__xconfigfile__(__filemansuffix__) are not hot-plug capable.
+.SH CONFIGURATION DETAILS
+Please refer to __xconfigfile__(__filemansuffix__) for general configuration
+details and for options that can be used with all input drivers.  This
+section only covers configuration details specific to this driver.
+.PP
+The following driver 
+.B Options
+are supported:
+.TP 7
+.BI "Option \*qDevice\*q \*q" string \*q
+Specifies the device through which the device can be accessed.  This will 
+generally be of the form \*q/dev/input/eventX\*q, where X is some integer.
+The mapping from device node to hardware is system-dependent. Property:
+"Device Node" (read-only).
+.TP 7
+.BI "Option \*qAccelSpeed\*q \*q" float \*q
+Sets the pointer acceleration speed within the range [-1, 1]
+.TP 7
+.BI "Option \*qCalibration\*q \*q" string \*q
+A string of 9 space-separated floating point numbers.
+Sets the calibration matrix to the 3x3 matrix where the first row is (abc),
+the second row is (def) and the third row is (ghi).
+.TP 7
+.BI "Option \*qLeftHanded\*q \*q" bool \*q
+Enables left-handed button orientation, i.e. swapping left and right buttons.
+.TP 7
+.BI "Option \*qNaturalScrolling\*q \*q" bool \*q
+Enables or disables natural scrolling behavior.
+.TP 7
+.BI "Option \*qScrollButton\*q \*q" int \*q
+Designates a button as scroll button. If the
+.BI ScrollMethod
+is
+.BI button
+and the button is logically held down, x/y axis movement is converted into
+scroll events.
+.TP 7
+.BI "Option \*qScrollMethod\*q \*q" string \*q
+Enables a scroll method. Permitted values are
+.BI none,
+.BI twofinger,
+.BI edge,
+.BI button.
+Not all devices support all options, if an option is unsupported, the
+default scroll option for this device is used.
+.TP 7
+.BI "Option \*qSendEventsMode\*q \*q" (disabled|enabled|disabled-on-external-mouse) \*q
+Sets the send events mode to disabled, enabled, or "disable when an external
+mouse is connected".
+.TP 7
+.BI "Option \*qTapping\*q \*q" bool \*q
+Enables or disables tap-to-click behavior.
+.PP
+For all options, the options are only parsed if the device supports that
+configuration option. For all options, the default value is the one used by
+libinput. On configuration failure, the default value is applied.
+
+.SH SUPPORTED PROPERTIES
+The following properties are provided by the
+.B libinput
+driver.
+.TP 7
+.BI "libinput Tapping Enabled"
+1 boolean value (8 bit, 0 or 1). 1 enables tapping
+.TP 7
+.BI "libinput Calibration Matrix"
+9 32-bit float values, representing a 3x3 calibration matrix, order is row
+1, row 2, row 3
+.TP 7
+.BI "libinput Accel Speed"
+1 32-bit float value, defines the pointer speed. Value range -1, 1
+.TP 7
+.BI "libinput Natural Scrolling Enabled"
+1 boolean value (8 bit, 0 or 1). 1 enables natural scrolling
+.TP 7
+.BI "libinput Send Events Mode"
+1 32-bit value, defines the sendevent mode. See the libinput documentation
+for the allowed values.
+
+.SH AUTHORS
+Peter Hutterer
+.SH "SEE ALSO"
+__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)

xorg-libinput.pc.in

@@ -1,6 +0,0 @@
-sdkdir=@sdkdir@
-
-Name: xorg-libinput
-Description: X.Org libinput input driver.
-Version: @PACKAGE_VERSION@
-Cflags: -I${sdkdir}