bonkmaykr/OrcaSlicer-bambulab
1
0 Fork 0
mirror of https://github.com/FULU-Foundation/OrcaSlicer-bambulab.git synced 2026-05-12 22:54:54 +00:00
Code Activity

Initial release

Browse Source
This commit is contained in:
Jake committed 2026-05-11 19:29:55 +01:00
commit d4d1215874
16967 files changed
+4075897
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

resources/profiles/Flashforge/filament/Flashforge Generic TPU.json
+192
View File
@@ -0,0 +1,192 @@
{
"type": "filament",
"name": "Flashforge Generic TPU",
"inherits": "fdm_filament_tpu",
"from": "system",
"setting_id": "GFSA04",
"filament_id": "GFG99",
"instantiation": "true",
"additional_cooling_fan_speed": [
"100"
],
"bed_temperature_difference": [
"10"
],
"chamber_temperature": "0",
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Flashforge Adventurer 5M 0.4 Nozzle",
"Flashforge Adventurer 5M 0.6 Nozzle",
"Flashforge Adventurer 5M 0.8 Nozzle",
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
"Flashforge Adventurer 5M Pro 0.8 Nozzle"
],
"compatible_printers_condition": "",
"compatible_prints": [],
"compatible_prints_condition": "",
"cool_plate_temp": [
"60"
],
"cool_plate_temp_initial_layer": [
"60"
],
"default_filament_colour": [
""
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"1"
],
"eng_plate_temp": [
"60"
],
"eng_plate_temp_initial_layer": [
"60"
],
"fan_cooling_layer_time": [
"100"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"filament_cost": [
"20"
],
"filament_density": [
"1.24"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \n"
],
"filament_flow_ratio": [
"1"
],
"filament_is_support": [
"0"
],
"filament_max_volumetric_speed": [
"3.5"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_length": [
"1.2"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_settings_id": [
"Flashforge TPU"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n;right_extruder_material:TPU\n"
],
"filament_type": [
"TPU"
],
"filament_vendor": [
"Generic"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"45"
],
"hot_plate_temp_initial_layer": [
"45"
],
"nozzle_temperature": [
"225"
],
"nozzle_temperature_initial_layer": [
"225"
],
"nozzle_temperature_range_high": [
"250"
],
"nozzle_temperature_range_low": [
"190"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"pressure_advance": [
"0.035"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"0"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"8"
],
"slow_down_min_speed": [
"20"
],
"support_material_interface_fan_speed": [
"100"
],
"temperature_vitrification": [
"60"
],
"textured_plate_temp": [
"60"
],
"textured_plate_temp_initial_layer": [
"60"
]
}