Yet another very internal function that the proprietary Nvidia driver
is using for unknown reasons.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The GLES tests need an actual GPU (/dev/dri/* device), which is not available
within github CI runners, so we need to skip those when running there.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The triangles test of rendercheck is known to be (partially broken on Xephyr,
since it doesn't fully support transparency (eg. a8 surfaces).
Therefore make it optional, so we're not spammed too much by false alarms
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Commit 3cb3024fea removed pScratchPixmap field
in ScreenRec, which broke legacy Nvidia (proprietary) drivers (470.x), thus
we should add an empty/dummy field here, to ensure correct padding. But this
would break ABI again - can't do that within minor release line.
As compromise, adding a *build time* option CONFIG_LEGACY_NVIDIA_PADDING for
this, so operators/packagers can opt-in to this change.
As it breaks ABI, the option is disabled by default until the next major release
and intended for EXPERTS ONLY who need nvidia390 or nvidia470 drivers.
Note that ALL DRIVERS should be rebuild if it is applied!
This compile-time option, along with the hacks needed to support it
in a non-abi-breaking way, should be droppen in the next major release.
Co-authored-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Signed-off-by: stefan11111 <stefan11111@shitposting.expert>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Xace callbacks are needed in many places, and the their overhead (when not
actually used) is really minimal. So it doesn't make much sense having
extra complexity for disabling it at build time.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The meson_options allow setting some `builder` mail address, and default
was still pointing to old, dead xorg.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This should be a deliberate decision of the user/distro. Just the presense
of some of its libraries in the build environment doesn't automatically
mean the user/distro actually wants it to be used.
HAL is pretty much obsolete, so we're considering to drop it entirely.
Anybody who's still needs it should call out loud now.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
a) the automatic detection logic is broken: it automatically enables it
when kms+udev enabled and dbus is found.
b) it should be a deliberate decision whether to enable it or not,
eg. just having (pieces of) systemd libraries present on the build
machine doesn't automatically mean the user/distro actually wants
it to be used.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
It always had it's own lifecycle (not been part of Xorg releases),
doesn't make sense to maintain a competing implementation that we
won't use anyways.
Once that's gone, we can also drop few things in core/dix that had
been added just for xwayland only.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Add tiny skeleton for the namespace extension. Disabled by default,
can be enabled via +extension arg, but doesn't actually do something yet.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Xwayland is a separate project/team and has it's own releases, so it's better
trying to to intefer with them and disable it by default.
It still can be easily enabled via meson arguments, and it's still enabled
in the CI. Let distros and operators decide on their own whether they want it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
DES isn't considered secure anymore for long time now, more and more platforms
dropping DES from their RPC implementations, and even the one where it came
from (Solaris) disabled it for a decade now. We have much better alternatives
(eg. passing creds via Unix socket for local connections, ssh tunneling,
MIT-MAGIC-COOKIE-1, ...), so it's unlikely anybody still really relying on it.
Therefore, sweep it out.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1453>
Now that the NVIDIA proprietary driver has grown support for GBM, the
EGLStream backend for NVIDIA GPUs is now superseded by the standard
GBM backend in Xwayland.
This code path is therefore not used and hardly ever tested.
Remove support for EGLStream in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1386>
Without this, systemd will be used if installed on the system automagically,
which is a problem if the built e.g. Xwayland is going to be used on a non-systemd
machine.
Bug: https://bugs.gentoo.org/908254
Signed-off-by: Sam James <sam@gentoo.org>
Most X servers, even those which do not have specific configuration
files, can use the directory specified by SERVER_MISC_CONFIG_PATH when
they have either the XSECURITY or XSELINUX extensions enabled, or when
support for DTRACE is enabled at build time, because this is also where
the "protocol.txt" file is searched for at runtime.
Unfortunately, the SERVER_MISC_CONFIG_PATH is set from serverconfigdir
which is hardcoded in the build system to "$prefix/$libdir/xorg", and
all X server builds share the same path.
That makes it harder for different X servers such as Xwayland to install
in the same path without sharing the same server configuration path
(and hence the same "protocol.txt" file).
Allow for the customization of server configuration path from the build
options so that different X servers can use completely different and
independent paths.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds support for XTEST in Xwayland using EIS, the emulated input
library [1].
To differentiate between X11 clients using XTEST, initiate a EI context
for each client and use the actual client name, from its command
line.
When an X11 client first tries to use XTEST to generate emulated input
events, a new connection to libEI is initiated by Xwayland on behalf
of the X11 client.
During that connection phase, the EI server will not be accepting
events until the emulated device is actually created, meaning that any
XTEST request from the X11 client will be discarded until the EI server
is willing to accept events.
To avoid that issue, add an event queue in Xwayland per X11 client that
will keep those requests, and dequeue them as soon as the EI server is
ready, i.e. once the EI device is added.
If the X11 client disconnects from the Xserver before the EI server is
ready, or if the connection is closed by the EI server, those events are
discarded and the queue cleared from any pending events.
For 10 minutes after the client disconnects, keep the internal struct
alive. If a client with the same commandline arguments connects again,
re-use the same struct. This means we are faster with the events the
second time around but it also allows the EIS server to pause individual
clients that keep sending intermittent events and disconnect immediately
(e.g. it'd be possible to pause xdtotool while an authentication prompt
is active).
[1] https://gitlab.freedesktop.org/libinput/libei
Thanks to Jan Beich <jbeich@FreeBSD.org> for fixing the build on BSD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Co-authored-by: Olivier Fourdan <ofourdan@redhat.com>
Co-authored-by: David Redondo <kde@david-redondo.de>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The only reason we still depend on xorg/font/utils is because we pull a
pkgconfig variable from that .pc file. Let's drop that dependency by
providing that option ourselves.
And where the option isn't specified and font-utils isn't found, default
to $datadir/fonts/X11, same path it's always been.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Booleans are supposed to be actual booleans, not strings describing
their value, but Meson has a bug where it silently accepts either one.
It's still wrong to do it though, and other implementations of Meson
such as muon choke on it.
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com>
When running rootful, the Xwayland window is not decorated (as all
Wayland surfaces), which makes it quite inconvenient to move on screen.
libdecor is "a client-side decorations library for Wayland clients"
which can be used precisely for adding decorations to Wayland surfaces.
Add optional support for libdecor in Xwayland to gain decorations when
running rootful and a new command line option "-decorate".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1332
It turns out xdmx currently crashes when any client attempts to use GL
and it has been in such state for about 14 years. There was a patch to
fix the problem [1] 4 years ago, but it never got merged. The last
activity on any bugs referring to xdmx has been more than 4 years ago.
Given such situation, I find it unlikely that anyone is still using xdmx
and just having the code is a drain of resources.
[1]: https://lists.x.org/archives/xorg-devel/2017-June/053919.html
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Xwayland is usually spawned by the Wayland compositor which sets the
command line options.
If a command line option is not supported, Xwayland will fail to start.
That somehow makes the Xwayland command line option sort of ABI, the
Wayland compositor need to know if a particular option is supported by
Xwayland at build time.
Also, currently, Xwayland is being installed along with the rest of the
common executable programs that users may run, which is sub-optimal
because, well, Xwayland is not a common executable program, it's meant
to be a proxy between the Wayland compositor and the legacy X11 clients
which wouldn't be able to run on Wayland otherwise.
Xwayland would be better installed in `libexec` but that directory is
(purposedly) not in the user `PATH` and therefore the Wayland compositor
may not be able to find Xwayland in that case.
To solve both problems (which options are supported by Xwayland and
where to look for it), add a `pkg-config` file specifically for Xwayland
which gives the full path to Xwayland (`xwayland`) and which options it
supports (using `pkg-config` variables).
The `pkg-config` file also provides the `Version` so the build scripts
can check for a particular version if necessary.
Obviously, Wayland compositors are not required to use the `pkg-config`
file and can continue to use whatever mechanism they deem preferable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Differences from autotools:
* Autotools defined NO_ALLOCA for OSX builds. I don't think we need
this anymore as Xalloc.h is no longer used anywhere in the xserver.
* X11.bin is linked with -u,miDCInitialize, and then libserver_mi
provided to satisfy (just) that. It's been that way since the commit
which added it. We can't write the equivalent in meson due to linker
argument ordering issues, but do we really need to?
* An explicit -Dsecure-rpc=false is required for OSX, since in meson we
don't do the checks that XTRANS_SECURE_RPC_FLAGS did for the existence
of the specific RPC functions required.
I don't think this is useful information to have in the log, and it's
a bunch of autotools and meson logic to produce it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Dependencies are ported from the automake build.
v2: Make it a tristate defaulting to 'auto'. Use pkg-config for libaudit.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
