Instead of directly accessing the global screenInfo.screens[] array,
let everybody go through a little inline helper. This one also checks
for array bounds - if the screen doesn't exist, return NULL.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Move functions/macros dealing with request parsing or reply assembly/write
out of the big dix_priv.h into their own headers. This new header will also
get more of those function/macros soon (yet still in the pipeline).
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
No need to have a hole bunch of extra functions, if we can just easily
inline the few relevant lines.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The macro will automatically return BadAlloc if the buffer is broken,
otherwise Success. Thus, we don't need extra prior rpcbuf check.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Add and use macro X_REPLY_HEADER_UNITS() for computing how many
extra protocol units are needed for a reply header (for .length field)
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Move the declaration of the reply struct down to after the payload has
been finally assembled, so we don't need extra payload size compuation
anymore.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Use x_rpcbuf_t for reply payload assembly, instead of pre-counting and
pre-allocating buffer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Use x_rpcbuf_t for reply payload assembly, instead of pre-counting and
pre-allocating buffer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Since the x_rpcbuf already knows how much had been written, there's no
need for extra payload size computation anymore - just pick the number
of written bytes from the x_rpcbuf.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
use x_rpcbuf_t operations for constructing the reply payload, so we don't
need to do the byte-swapping explicitly anymore.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Second step of migrating ProcVidModeGetAllModeLines() to x_rpcbuf_t:
Let it's callees also use x_rpcbuf_t operations, instead of raw pointers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
First step of migration to x_rpcbuf: create a buffer with enough room for
the already calculated payload size and pass the raw buffer pointer to
our callees as we used to do with the calloc()ed one.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The monitor values (vendor and model) accidentally had been copied
at the start of the payload, instead of being appended after the
previously copied data, and also moving the wrong pointer, thus
corrupting the reply and causing some clients to hang.
Signed-off-by: Tautvis <gtautvis@gmail.com>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Lots of logging functions, especially init and teardown aren't called
by any drivers/modules, so no need to keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The ProcVidModeGetAllModeLines() is a bit complicated, because reply structs
differ depending the active protocol version. In order to make it easier to
understand and allow further simplification of the request/reply marshalling
(see ticket #1701), splitting the two protocol versions into separate functions.
Also collecting the whole payload in a stack buffer (size is already known
anyways), in order to save arbirary number of individual WriteToClient() calls,
but send out the whole reply in one pass, which in turn allows further
simplifications in the sending path.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
WriteToClient() already checks for zero-length buffer and does nothing
in that case. So we can make the code a bit easier to read and also
allow further simplification of reply submission by upcoming commits.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Make the code a bit easier to understand by declaring the variables
where they're first used instead of at the very top of the function.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Collect up the puzzle piezes of the reply payload into to a temporary buffer,
so we can send it as one block. This allows for further simplifications by
subsequent commits, as well as packet based transports and message based
compression.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
We can simply call SwapLongs() before writing out the CARD32 arrays.
No need using for complicated call back logic.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Semantically these are separate values in each branch any only used there,
so it's a bit more clean to move the declaration into the branches.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The WriteSwappedDataToClient() already checks whether client is swapped
and directly calls WriteToClient() if it's not.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Coherently moving all reply struct decls and assignments into static
initialization right at declaration, just before it is getting byte-
swapped and sent out. Zero-assignments can be dropped here, since the
compiler automatically initializes all other fields to zero.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This part moves the request payload structs (or pointers to them) into the
per-version branches. Within each branch following our usual scheme for
extension request handlers (eg. using the REQUEST*() macros and having a
pointer named `stuff` to the current request struct)
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This part is splitting the huge request handlers into upper and lower half,
where the upper is doing the version check and converting v1 requests into v2,
while the lower one is doing the actual request processing, operating on the
struct pointer passed in from the upper one, instead of the client struct's
request buffer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This moving the request size check into the if-version-X branches, to make it
some bit easier to undertand.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These dispatcher functions are much more complex than they're usually are
(just switch/case statement). Bring them in line with the standard scheme
used in the Xserver, so further steps become easier.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Only key difference that calloc(), in contrast to rellocarray(),
is zero-initializing. The overhead is hard to measure on today's
machines, and it's safer programming practise to always allocate
zero-initialized, so one can't forget to do it explicitly.
Cocci rule:
@@
expression COUNT;
expression LEN;
@@
- xallocarray(COUNT,LEN)
+ calloc(COUNT,LEN)
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Using calloc() instead of malloc() as preventive measure, so there
never can be any hidden bugs or leaks due uninitialized memory.
The extra cost of using this compiler intrinsic should be practically
impossible to measure - in many cases a good compiler can even deduce
if certain areas really don't need to be zero'd (because they're written
to right after allocation) and create more efficient machine code.
The code pathes in question are pretty cold anyways, so it's probably
not worth even thinking about potential extra runtime costs.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The symbol controls whether to include dix-config.h, and it's always set,
thus we don't need it (and dozens of ifdef's) anymore.
This commit only removes them from our own source files, where we can
guarantee that dix-config.h is present - leaving the (potentially exported)
headers untouched.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In commit f175cf45ae
Author: Olivier Fourdan <ofourdan@redhat.com>
Date: Wed Feb 10 09:34:34 2016 +0100
vidmode: move to a separate library of its own
the verbosity of some old debug messages (which print the reply to every
GetModeLine client request and others) was increased leading to lots of
log spam. Downgrade the logging back to DebugF.
[ajax: Fix a typo so it compiles.]
Reviewed-by: Adam Jackson <ajax@redhat.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=94515
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Olivier Fourdan <ofourdan@redhat.com>
git commit f175cf45:
vidmode: move to a separate library of its own
introduced a regression where the xserver would not build when
xf86vidmodeproto is not installed even if the configure option
"--disable-xf86vidmode" is specified.
Fix build failure when xf86vidmodeproto is not installed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
