iterating over screen list via lambda-esque macros calls like this
DIX_FOR_EACH_SCREEN({
do_something
});
withing the body, the iterator variables `walkScreenIdx` and `walkScreen`
are defined and can be directly used (read-only). the code inside the body
is running in a separate scope.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Not used by any external drivers, so no need to keep them in public
SDK headers. Since they're never used by drivers, it's effectively
not an ABI change, so can safely be done within ABI-25.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Move functions/macros dealing with request parsing or reply assembly/write
out of the big dix_priv.h into their own headers. This new header will also
get more of those function/macros soon (yet still in the pipeline).
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
When iterating screen lists, consistently use the same variable name
`walkScreenIdx` for holding current screen index everywhere.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The few instructions for byte-swapping are trivial enought to be inlined
into the actual request handlers, so we can reduce a lot of boilerplate.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
When iterating screen lists, consistently use the same variable name
`walkScreen` for holding current screen pointer everywhere.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Since most of the extension init logic (and on/off switches for them)
is driven from miext, this seems the appropriate place for the header.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Using calloc() instead of malloc() as preventive measure, so there
never can be any hidden bugs or leaks due uninitialized memory.
The extra cost of using this compiler intrinsic should be practically
impossible to measure - in many cases a good compiler can even deduce
if certain areas really don't need to be zero'd (because they're written
to right after allocation) and create more efficient machine code.
The code pathes in question are pretty cold anyways, so it's probably
not worth even thinking about potential extra runtime costs.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Not used by any external module (eg drivers), so no need to keep it
exported. Also documenting it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The symbol controls whether to include dix-config.h, and it's always set,
thus we don't need it (and dozens of ifdef's) anymore.
This commit only removes them from our own source files, where we can
guarantee that dix-config.h is present - leaving the (potentially exported)
headers untouched.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Windows' native headers using some our RT_* define's names for other things.
Since the naming isn't very nice anyways, introducing some new ones
(X11_RESTYPE_NONE, X11_RESTYPE_FONT, X11_RESTYPE_CURSOR) and define the old
ones as an alias to them, in case some out-of-tree code still uses them.
With thins change, we don't need to be so extremely careful about include
ordering and have explicit #undef's in order to prevent name clashes on
Win32 targets.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1355>
This allows applications to respond to changes of power level
of a monitor, e.g. an application may stop rendering and related
calculations when the monitor is off.
Related bug: https://bugs.freedesktop.org/57120
Signed-off-by: Alexander Volkov <avolkov@astralinux.ru>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than setting up a per-screen private, just conditionally
initialize ScrnInfoRec::DPMSSet based on the config options, and inspect
that to determine whether DPMS is supported.
We also move the "turn the screen back on at CloseScreen" logic into the
DPMS extension's (new) reset hook. This would be a behavior change for
the non-xfree86 servers, if any of them had non-stub DPMS support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
INITARGS was a hardcoded define to void. Since knowing the function
signature for your extensions is kinda useful, just replace it with a
hardcoded void, but leave the define there for API compatibility.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
When we change the DPMS mode, don't play games with the last event time as
this breaks applications using IDLETIME to turn the backlight off after a
preset time.
This patch fixes gnome-power-manager and xfce-power-manager
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
